From mboxrd@z Thu Jan 1 00:00:00 1970 From: Heiko Schocher Date: Tue, 11 Aug 2015 11:44:19 +0200 Subject: [U-Boot] [PATCH v2 1/4] ARM: at91: add cpu.h In-Reply-To: <20150811090321.GJ3411@piout.net> References: <1439187268-16449-1-git-send-email-hs@denx.de> <1439187268-16449-2-git-send-email-hs@denx.de> <20150811090321.GJ3411@piout.net> Message-ID: <55C9C3F3.7010408@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello Alexandre, Am 11.08.2015 um 11:03 schrieb Alexandre Belloni: > Hi, > > On 10/08/2015 at 08:14:24 +0200, Heiko Schocher wrote : >> add cpu.h from linux: >> >> 7538ec7d1e5: ARM: at91: remove no-MMU at91x40 support >> >> so it is easier to port linux code, which is based on it. >> >> Signed-off-by: Heiko Schocher >> --- >> >> Changes in v2: None >> >> arch/arm/mach-at91/include/mach/cpu.h | 149 ++++++++++++++++++++++++++++++++++ >> 1 file changed, 149 insertions(+) >> create mode 100644 arch/arm/mach-at91/include/mach/cpu.h >> > > My comment still holds, you should not need that a no Linux code is Sorry, seems I missed your comment ... Sorry for that. > using cpui_is_at91* anymore. The main concern is that you will be based > on an older version of the driver and you will be missing future fixes. Ok, I look into this, and update to a newer version. bye, Heiko -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany