[U-Boot] [PATCH] arm: mx6: Remove SPI support from WRU-IV baseboard

Stefano Babic
2015-08-05T09:00:56Z

Hi Stefan, Clemens,

On 05/08/2015 10:50, Stefan Roese wrote:
> This patch removes the SPI support from the WRU-IV baseboard as its
> not used at all.
>
> Signed-off-by: Stefan Roese <sr@denx.de>
> Cc: Clemens Gruber <clemens.gruber@pqgruber.com>
> Cc: Markus Niebel <Markus.Niebel@tq-group.com>
> Cc: Stefano Babic <sbabic@denx.de>
> ---
> board/tqc/tqma6/tqma6.c | 1 +
> configs/tqma6s_wru4_mmc_defconfig | 3 ---
> include/configs/tqma6_wru4.h | 8 ++++++++
> 3 files changed, 9 insertions(+), 3 deletions(-)
>
> diff --git a/board/tqc/tqma6/tqma6.c b/board/tqc/tqma6/tqma6.c
> index 29db838..8656782 100644
> --- a/board/tqc/tqma6/tqma6.c
> +++ b/board/tqc/tqma6/tqma6.c
> @@ -25,6 +25,7 @@
> #include <mmc.h>
> #include <power/pfuze100_pmic.h>
> #include <power/pmic.h>
> +#include <spi_flash.h>
>
> #include "tqma6_bb.h"
>
> diff --git a/configs/tqma6s_wru4_mmc_defconfig b/configs/tqma6s_wru4_mmc_defconfig
> index 66ac0b1..e30b130 100644
> --- a/configs/tqma6s_wru4_mmc_defconfig
> +++ b/configs/tqma6s_wru4_mmc_defconfig
> @@ -3,11 +3,8 @@ CONFIG_ARCH_MX6=y
> CONFIG_TARGET_TQMA6=y
> CONFIG_TQMA6S=y
> CONFIG_WRU4=y
> -CONFIG_CMD_SETEXPR=y
> -CONFIG_CMD_NET=y
> CONFIG_AUTOBOOT_KEYED=y
> CONFIG_AUTOBOOT_PROMPT="Enter password in %d seconds to stop autoboot\n"
> CONFIG_AUTOBOOT_ENCRYPTION=y
> CONFIG_AUTOBOOT_STOP_STR_SHA256="36a9e7f1c95b82ffb99743e0c5c4ce95d83c9a430aac59f84ef3cbfab6145068"
> CONFIG_PCA9551_LED=y
> -CONFIG_SPI_FLASH=y
> diff --git a/include/configs/tqma6_wru4.h b/include/configs/tqma6_wru4.h
> index 1c86bc0..1330a0a 100644
> --- a/include/configs/tqma6_wru4.h
> +++ b/include/configs/tqma6_wru4.h
> @@ -68,4 +68,12 @@
> #define CONFIG_SYS_BOOTCOUNT_ADDR IRAM_BASE_ADDR
> #define CONFIG_SYS_BOOTCOUNT_BE
>
> +/*
> + * Remove all unused interfaces / commands that are defined in
> + * the common header tqms6.h
> + */
> +#undef CONFIG_CMD_SF
> +#undef CONFIG_CMD_SPI
> +#undef CONFIG_MXC_SPI
> +
> #endif /* __CONFIG_TQMA6_WRU4_H */
>

I read the thread - Clemens, can you send your Tested-by after you
tested with success the patch ? I will apply it, then..

Best regards,
Stefano Babic

--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================