public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: vikasm <vikas.manocha@st.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH RESEND 0/7] spi: cadence_qspi: optimize & fix indirect rd-writes
Date: Tue, 11 Aug 2015 14:19:54 -0700	[thread overview]
Message-ID: <55CA66FA.6000603@st.com> (raw)
In-Reply-To: <55B0DC77.5020600@denx.de>

Hi Stefan,

On 07/23/2015 05:22 AM, Stefan Roese wrote:
> Hi Vikas,
> 
> On 16.07.2015 08:46, Stefan Roese wrote:
>>>>> In addition can you please check the patch causing this instability on
>>>>> socfpga. I don't like to bug you but to close this patchset, this info
>>>>> & tests mentioned above seems to be required.
>>>>
>>>> Okay. I'll try to find some time this week to do some testing here.
>>>> It seems
>>>> that the other cadence patchset from you ([v4 00/10] spi:
>>>> cadence_qspi: sram depth from DT & fix for FIFO width) is not pulled
>>>> into
>>>> mainline yet. To make it easier for me, could you perhaps publish a git
>>>> repository that is based on current mainline. And has the mentioned
>>>> above
>>>> patch series included. And all the patches in the latest version that
>>>> are
>>>> currently causing these problems on SoCFPGA?
>>>
>>> The patchset was in u-boot-spi repository, yesterday pulled by Tom in
>>> mainline. I will rebase the patchset in discussion
>>> (spi: cadence_qspi: optimize & fix indirect rd-writes) on mainline
>>> master & send the V2.
>>>
>>> Let me know if it is ok.
>>
>> Okay, I'll try to find some time later this week or next week for some
>> tests.
> 
> I couldn't find the required time to  test these patches again yet. 
> Sorry. And I'll leave for a short vacation tomorrow. So I won't be able 
> to get to this issue before week 32.
> 
> Perhaps somebody else finds some time to look at this QSPI driver issue 
> in the meantime

Any update ?

Cheers,
Vikas

> 
> Thanks,
> Stefan
> 
> .
> 

  reply	other threads:[~2015-08-11 21:19 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-17  2:14 [U-Boot] [PATCH RESEND 0/7] spi: cadence_qspi: optimize & fix indirect rd-writes Vikas Manocha
2015-06-17  2:14 ` [U-Boot] [PATCH RESEND 1/7] spi: cadence_qspi: remove sram polling from flash read Vikas Manocha
2015-06-17  2:14 ` [U-Boot] [PATCH RESEND 2/7] spi: cadence_qspi: read can be independent of fifo width Vikas Manocha
2015-06-17  2:14 ` [U-Boot] [PATCH RESEND 3/7] spi: cadence_qspi: remove sram polling from flash write Vikas Manocha
2015-06-17  2:14 ` [U-Boot] [PATCH RESEND 4/7] spi: cadence_qspi: move trigger base configuration in init Vikas Manocha
2015-06-17  2:14 ` [U-Boot] [PATCH RESEND 5/7] spi: cadence_qspi: fix indirect read/write start address Vikas Manocha
2015-06-17  2:14 ` [U-Boot] [PATCH RESEND 6/7] spi: cadence_qspi: fix base trigger address & transfer " Vikas Manocha
2015-06-17  2:14 ` [U-Boot] [PATCH RESEND 7/7] spi: cadence_qspi: get fifo width from device tree Vikas Manocha
2015-06-18 12:02 ` [U-Boot] [PATCH RESEND 0/7] spi: cadence_qspi: optimize & fix indirect rd-writes Stefan Roese
2015-06-18 18:05   ` Vikas MANOCHA
2015-06-19  6:16     ` Stefan Roese
2015-06-19 21:38       ` Vikas MANOCHA
2015-06-22  8:34         ` Stefan Roese
2015-06-22 23:31           ` Vikas MANOCHA
2015-06-23 14:36             ` Graham Moore
2015-06-23 14:51               ` Vikas MANOCHA
2015-07-02 17:50               ` Vikas MANOCHA
2015-07-06 17:56                 ` Graham Moore
2015-07-06 18:19                   ` Vikas MANOCHA
2015-07-01 16:24           ` Vikas MANOCHA
2015-07-09  1:29           ` Vikas MANOCHA
2015-07-13  9:00             ` Stefan Roese
2015-07-15 21:14               ` Vikas MANOCHA
2015-07-16  6:46                 ` Stefan Roese
2015-07-23 12:22                   ` Stefan Roese
2015-08-11 21:19                     ` vikasm [this message]
2015-08-12 11:36                       ` Stefan Roese
2015-08-12 12:01                         ` Jagan Teki
2015-08-12 17:52                           ` vikasm
2015-08-12 20:22                             ` Marek Vasut
2015-08-13  0:16                               ` vikasm
2015-08-13  0:26                                 ` Marek Vasut
2015-08-13  0:36                                   ` vikasm
2015-08-13  2:15                                     ` Marek Vasut

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=55CA66FA.6000603@st.com \
    --to=vikas.manocha@st.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox