[U-Boot] [PATCH v6 5/5] usb: lpc32xx: add host USB driver

[Vladimir Zapolskiy <vz@mleia.com>]

On 13.08.2015 14:55, LEMIEUX, SYLVAIN wrote:
> 
>> -----Original Message-----
>> From: Vladimir Zapolskiy [mailto:vz at mleia.com]
>> Sent: 12-Aug-15 8:05 PM
>>
>> Hi Sylvain,
>>
>> On 12.08.2015 23:00, LEMIEUX, SYLVAIN wrote:
>>> Hi Vladimir and Marek,
>>>
>>>> -----Original Message-----
>>>> From: Vladimir Zapolskiy [mailto:vz at mleia.com]
>>>> Sent: 12-Aug-15 1:55 PM
>>>>
>>>> Hi Sylvain,
>>>>
>>>> On 10.08.2015 15:16, slemieux.tyco at gmail.com wrote:
>>>>> From: Sylvain Lemieux <slemieux@tycoint.com>
>>>>>
>>>>> Incorporate USB driver from legacy LPCLinux NXP BSP.
>>>>> The files taken from the legacy patch are:
>>>>> - lpc32xx USB driver
>>>>> - lpc3250 header file USB registers definition.
>>>>>
>>>>> The legacy driver was updated and clean-up as part of the integration with the latest u-boot.
>>>>>
>>>>> Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
>>>>> ---
>>
>> [snip]
>>
>>>>> +   }
>>>>> +
>>>>> +   /* Configure ISP1301 */
>>>>> +   isp1301_configure();
>>>>
>>>> Not sure if there are any LPC32xx boards with USB host/device, but
>>>> without ISP1301 phy. Let it be here until such a board emerges, if Marek
>>>> does not object.
>>>>
>>>> In general I wonder, won't drivers/usb/phy/ be a better place for this
>>>> driver or bigger part of it?
>>>
>>> The Embedded Artists LPC3250 OEM Board is having the USB with the ISP1301;
>>> http://www.embeddedartists.com/products/kits/lpc3250_kit.php
>>> The legacy NXP LPC32xx BSP included board support files for it.
>>>
>>
>> it seems to be a usual design pattern, my devkit3250 board also has
>> ISP1301 phy. The question is if fusion of a particular external phy
>> device driver and a particular host device driver are permitted in form
>> of a host driver only.
>>
>> This is a question in area of device driver(s) maintenance, therefore
>> Marek should rule it. For me as a user I'm satisfied with the approach,
>> when on-SoC host device and external phy device share one driver for
>> both. Just when an LPC32xx powered board with USB emerges without
>> ISP1301 phy or other way round ISP1301 phy is used in junction with
>> another host/device, this time the driver will be split.
>>
> The maintainer, Marek,  previously ack the patch;
> https://www.mail-archive.com/u-boot at lists.denx.de/msg180934.html
> I am assuming it is OK to keep the current approach.
> 
> I will add your tested, as per this message listed below and the ack from
> Marek when I submit revision 7, later today.
> https://www.mail-archive.com/u-boot at lists.denx.de/msg180934.html
> 

Sure, thank you.

--
With best wishes,
Vladimir