public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: vikasm <vikas.manocha@st.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [v2 1/6] spi: cadence_qspi: move trigger base configuration in init
Date: Thu, 13 Aug 2015 12:05:50 -0700	[thread overview]
Message-ID: <55CCEA8E.2050301@st.com> (raw)
In-Reply-To: <201508131935.41850.marex@denx.de>

Hi,

On 08/13/2015 10:35 AM, Marek Vasut wrote:
> On Thursday, August 13, 2015 at 05:50:18 PM, vikasm wrote:
>> Hi Marek,
> 
> Hi!
> 
>> On 08/12/2015 07:07 PM, Marek Vasut wrote:
>>> On Thursday, July 16, 2015 at 04:27:29 AM, Vikas Manocha wrote:
>>>
>>> Commit message is missing.
>>
>> Actually subject of the mail was sufficient, this patch just moves the
>> register configuration in init.
> 
> NAK, fix the commit message.

ok.

Rgds,
Vikas

> 
>>>> Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
>>>> ---
>>>>
>>>> Changes in v2: Rebased to master
>>>>
>>>>  drivers/spi/cadence_qspi_apb.c |    9 ++-------
>>>>  1 file changed, 2 insertions(+), 7 deletions(-)
>>>>
>>>> diff --git a/drivers/spi/cadence_qspi_apb.c
>>>> b/drivers/spi/cadence_qspi_apb.c index d053407..1ae7edf 100644
>>>> --- a/drivers/spi/cadence_qspi_apb.c
>>>> +++ b/drivers/spi/cadence_qspi_apb.c
>>>> @@ -534,6 +534,8 @@ void cadence_qspi_apb_controller_init(struct
>>>> cadence_spi_platdata *plat)
>>>>
>>>>  	/* Indirect mode configurations */
>>>>  	writel((plat->sram_size/2), plat->regbase + CQSPI_REG_SRAMPARTITION);
>>>>
>>>> +	writel(((u32)plat->ahbbase & CQSPI_INDIRECTTRIGGER_ADDR_MASK),
>>>
>>> You can drop the parenthesis around the first argument, they're useless.
>>> Also, the indent of the second arg should be fixed, I believe checkpatch
>>> might even complain about it.
>>
>> ok.
> 
> Thanks :)
> 
> Best regards,
> Marek Vasut
> .
> 

  reply	other threads:[~2015-08-13 19:05 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-16  2:27 [U-Boot] [v2 0/6] spi: cadence_qspi: optimize & fix indirect rd-writes Vikas Manocha
2015-07-16  2:27 ` [U-Boot] [v2 1/6] spi: cadence_qspi: move trigger base configuration in init Vikas Manocha
2015-08-13  2:07   ` Marek Vasut
2015-08-13 15:50     ` vikasm
2015-08-13 17:35       ` Marek Vasut
2015-08-13 19:05         ` vikasm [this message]
2015-08-14  1:24         ` vikas
2015-08-14  1:43           ` Marek Vasut
2015-08-14  1:44             ` vikas
2015-08-14  1:55               ` Marek Vasut
2015-07-16  2:27 ` [U-Boot] [v2 2/6] spi: cadence_qspi: remove sram polling from flash read Vikas Manocha
2015-08-13  2:09   ` Marek Vasut
2015-08-13 16:27     ` vikasm
2015-08-13 17:33       ` Marek Vasut
2015-08-13 19:49         ` vikas
2015-08-13 20:35           ` Marek Vasut
2015-08-13 21:04             ` vikas
2015-08-13 22:47               ` Marek Vasut
2015-08-13 23:18                 ` vikas
2015-08-13 23:46                   ` Marek Vasut
2015-08-14  0:26                     ` vikas
2015-08-14  0:44                       ` Marek Vasut
2015-08-14  0:46                         ` vikas
2015-08-14  1:03                           ` Marek Vasut
2015-08-14  1:05                             ` vikas
2015-08-14  3:54                               ` Marek Vasut
2015-07-16  2:27 ` [U-Boot] [v2 3/6] spi: cadence_qspi: remove sram polling from flash write Vikas Manocha
2015-08-13  2:11   ` Marek Vasut
2015-08-13 16:30     ` vikasm
2015-08-13 17:34       ` Marek Vasut
2015-07-16  2:27 ` [U-Boot] [v2 4/6] spi: cadence_qspi: fix indirect read/write start address Vikas Manocha
2015-07-16  2:27 ` [U-Boot] [v2 5/6] spi: cadence_qspi: fix base trigger address & transfer " Vikas Manocha
2015-08-13  2:15   ` Marek Vasut
2015-08-13 16:42     ` vikasm
2015-08-13 21:36       ` vikas
2015-08-13 22:48         ` Marek Vasut
2015-08-14  0:37           ` vikas
2015-08-14  1:04             ` Marek Vasut
2015-08-14  1:39               ` vikas
2015-08-14  1:56                 ` Marek Vasut
2015-08-14  2:14                   ` Vikas MANOCHA
2015-07-16  2:27 ` [U-Boot] [v2 6/6] spi: cadence_qspi: get fifo width from device tree Vikas Manocha

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=55CCEA8E.2050301@st.com \
    --to=vikas.manocha@st.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox