From: Stefan Roese <sr@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 1/2] arm: Enable CONFIG_SYS_GENERIC_BOARD for all boards
Date: Fri, 14 Aug 2015 06:50:21 +0200 [thread overview]
Message-ID: <55CD738D.2090701@denx.de> (raw)
In-Reply-To: <1439500791-19068-2-git-send-email-sjg@chromium.org>
Hi Simon,
On 13.08.2015 23:19, Simon Glass wrote:
> All boards should be converted to generic board by now. Change the rest
> over. If this causes run-time breakages then we can remove those boards.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
>
> arch/Kconfig | 1 +
> arch/arm/include/asm/arch-lpc32xx/config.h | 2 --
> include/configs/VCMA9.h | 1 -
> include/configs/am3517_crane.h | 1 -
> include/configs/am3517_evm.h | 1 -
> include/configs/apf27.h | 1 -
> include/configs/armadillo-800eva.h | 1 -
> include/configs/aspenite.h | 5 -----
> include/configs/at91-sama5_common.h | 2 --
> include/configs/at91rm9200ek.h | 2 --
> include/configs/at91sam9260ek.h | 2 --
> include/configs/at91sam9261ek.h | 2 --
> include/configs/at91sam9263ek.h | 2 --
> include/configs/at91sam9m10g45ek.h | 2 --
> include/configs/at91sam9n12ek.h | 1 -
> include/configs/at91sam9rlek.h | 2 --
> include/configs/at91sam9x5ek.h | 2 --
> include/configs/bcm28155_ap.h | 1 -
> include/configs/bcm_ep_board.h | 2 --
> include/configs/bur_am335x_common.h | 2 --
> include/configs/calimain.h | 1 -
> include/configs/cm5200.h | 3 ---
> include/configs/cm_t35.h | 1 -
> include/configs/cm_t3517.h | 1 -
> include/configs/cm_t54.h | 3 ---
> include/configs/colibri_pxa270.h | 1 -
> include/configs/colibri_vf.h | 1 -
> include/configs/corvus.h | 1 -
> include/configs/da850evm.h | 1 -
> include/configs/db-88f6820-gp.h | 1 -
> include/configs/db-mv784mp-gp.h | 1 -
> include/configs/digsy_mtc.h | 1 -
> include/configs/dns325.h | 1 -
> include/configs/dockstar.h | 2 --
> include/configs/dreamplug.h | 1 -
> include/configs/edminiv2.h | 3 ---
> include/configs/ethernut5.h | 2 --
> include/configs/exynos-common.h | 2 --
> include/configs/flea3.h | 1 -
> include/configs/goflexhome.h | 2 --
> include/configs/gplugd.h | 5 -----
> include/configs/guruplug.h | 2 --
> include/configs/h2200.h | 1 -
> include/configs/highbank.h | 1 -
> include/configs/ib62x0.h | 2 --
> include/configs/iconnect.h | 2 --
> include/configs/imx31_phycore.h | 2 --
> include/configs/integrator-common.h | 1 -
> include/configs/ipam390.h | 1 -
> include/configs/km/km_arm.h | 2 --
> include/configs/km82xx.h | 1 -
> include/configs/km8360.h | 1 -
> include/configs/kzm9g.h | 1 -
> include/configs/ls1021aqds.h | 2 --
> include/configs/ls1021atwr.h | 2 --
> include/configs/ls2085a_common.h | 2 --
> include/configs/lsxl.h | 2 --
> include/configs/m53evk.h | 1 -
> include/configs/maxbcm.h | 1 -
> include/configs/mcx.h | 2 --
> include/configs/mx25pdk.h | 1 -
> include/configs/mx31ads.h | 2 --
> include/configs/mx31pdk.h | 2 --
> include/configs/mx35pdk.h | 1 -
> include/configs/mx51evk.h | 1 -
> include/configs/mx53ard.h | 2 --
> include/configs/mx53evk.h | 2 --
> include/configs/mx53loco.h | 2 --
> include/configs/mx53smd.h | 2 --
> include/configs/mx6_common.h | 1 -
> include/configs/mx6ul_14x14_evk.h | 1 -
> include/configs/mxs.h | 5 -----
> include/configs/nas220.h | 1 -
> include/configs/nokia_rx51.h | 1 -
> include/configs/omap3_zoom1.h | 1 -
> include/configs/omapl138_lcdk.h | 1 -
> include/configs/p1_p2_rdb_pc.h | 1 -
> include/configs/pm9261.h | 2 --
> include/configs/pm9263.h | 2 --
> include/configs/pm9g45.h | 2 --
> include/configs/pogo_e02.h | 2 --
> include/configs/rcar-gen2-common.h | 1 -
> include/configs/rpi-common.h | 1 -
> include/configs/s5p_goni.h | 2 --
> include/configs/sheevaplug.h | 2 --
> include/configs/siemens-am33x-common.h | 2 --
> include/configs/smdk2410.h | 2 --
> include/configs/smdkc100.h | 2 --
> include/configs/snapper9260.h | 1 -
> include/configs/socfpga_common.h | 2 --
> include/configs/spear-common.h | 2 --
> include/configs/stm32f429-discovery.h | 1 -
> include/configs/stv0991.h | 1 -
> include/configs/sunxi-common.h | 1 -
> include/configs/tam3517-common.h | 1 -
> include/configs/tao3530.h | 1 -
> include/configs/taurus.h | 1 -
> include/configs/tegra-common.h | 1 -
> include/configs/ti_armv7_common.h | 1 -
> include/configs/tricorder.h | 2 --
> include/configs/uniphier.h | 2 --
> include/configs/usb_a9263.h | 1 -
> include/configs/usbarmory.h | 1 -
> include/configs/vexpress_aemv8a.h | 3 ---
> include/configs/vexpress_common.h | 1 -
> include/configs/vf610twr.h | 1 -
> include/configs/woodburn_common.h | 1 -
> include/configs/work_92105.h | 1 -
> include/configs/x600.h | 1 -
> include/configs/xilinx-ppc.h | 2 --
> include/configs/xilinx_zynqmp.h | 2 --
> include/configs/zmx25.h | 2 --
> include/configs/zynq-common.h | 2 --
> 113 files changed, 1 insertion(+), 180 deletions(-)
Nice statistic. :)
Acked-by: Stefan Roese <sr@denx.de>
Thanks,
Stefan
next prev parent reply other threads:[~2015-08-14 4:50 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-13 21:19 [U-Boot] [PATCH 0/2] arm: Move all boards over to generic board Simon Glass
2015-08-13 21:19 ` [U-Boot] [PATCH 1/2] arm: Enable CONFIG_SYS_GENERIC_BOARD for all boards Simon Glass
2015-08-13 22:38 ` Masahiro Yamada
2015-08-13 22:52 ` Simon Glass
2015-08-14 4:47 ` Anatolij Gustschin
2015-08-14 4:50 ` Stefan Roese [this message]
2015-08-27 10:22 ` Ajay
2015-08-13 21:19 ` [U-Boot] [PATCH 2/2] arm: Drop old non-generic-board code Simon Glass
2015-08-18 13:03 ` [U-Boot] [PATCH 0/2] arm: Move all boards over to generic board Pavel Machek
2015-08-21 20:52 ` Simon Glass
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55CD738D.2090701@denx.de \
--to=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox