From mboxrd@z Thu Jan 1 00:00:00 1970 From: Heiko Schocher Date: Fri, 14 Aug 2015 11:37:40 +0200 Subject: [U-Boot] [U-Boot, v2, 3/3] arm, at91: support for sam9260 based smwartweb board In-Reply-To: <20150813131719.GH25532@bill-the-cat> References: <1435561848-15132-4-git-send-email-hs@denx.de> <20150813131719.GH25532@bill-the-cat> Message-ID: <55CDB6E4.5090600@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello Tom, Am 13.08.2015 um 15:17 schrieb Tom Rini: > On Mon, Jun 29, 2015 at 09:10:48AM +0200, Heiko Schocher wrote: > >> add support for the at91sam9260 based board smartweb from >> siemens. SPL is used without serial support, as this >> SoC has only 4k sram for running SPL. Here a U-Boot >> bootlog: >> >> RomBOOT >>> >> >> U-Boot 2015.07-rc2-00109-g4ae828c (Jun 15 2015 - 09:31:16 +0200) >> >> CPU: AT91SAM9260 >> Crystal frequency: 18.432 MHz >> CPU clock : 198.656 MHz >> Master clock : 99.328 MHz >> Watchdog enabled >> DRAM: 64 MiB >> WARNING: Caches not enabled >> NAND: 256 MiB >> In: serial >> Out: serial >> Err: serial >> Net: macb0 >> Hit any key to stop autoboot: 0 >> U-Boot> >> >> Signed-off-by: Heiko Schocher > > Applied to u-boot/master, thanks! Thanks! @Andreas: Do you find time for my other at91 board patches pending? Here my current open patches list (except the at91 dfu support patches) Patchwork [U-Boot] arm, at91: add axm extensions https://patchwork.ozlabs.org/patch/484257/ ------------------------------------ corvus: Patchwork [U-Boot] corvus, dfu: add dfu support https://patchwork.ozlabs.org/patch/484261/ Patchwork [U-Boot] at91: corvus: board updates https://patchwork.ozlabs.org/patch/484262/ ------------------------------------ taurus: Patchwork [U-Boot] taurus: board updates https://patchwork.ozlabs.org/patch/484292/ bye, Heiko -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany