* [U-Boot] [PATCH] imx: mx6sxsabresd: enable CONFIG_SPL_FAT_SUPPORT
@ 2015-08-17 8:12 Peng Fan
2015-08-17 8:57 ` Stefano Babic
2015-08-24 7:46 ` Stefano Babic
0 siblings, 2 replies; 3+ messages in thread
From: Peng Fan @ 2015-08-17 8:12 UTC (permalink / raw)
To: u-boot
Enable CONFIG_SPL_FAT_SUPPORT to load u-boot.img from FAT partition.
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
---
include/configs/mx6sxsabresd.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h
index 848bdcd..74d04a0 100644
--- a/include/configs/mx6sxsabresd.h
+++ b/include/configs/mx6sxsabresd.h
@@ -15,6 +15,7 @@
#ifdef CONFIG_SPL
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SPL_FAT_SUPPORT
#include "imx6_spl.h"
#endif
--
1.8.4
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [U-Boot] [PATCH] imx: mx6sxsabresd: enable CONFIG_SPL_FAT_SUPPORT
2015-08-17 8:12 [U-Boot] [PATCH] imx: mx6sxsabresd: enable CONFIG_SPL_FAT_SUPPORT Peng Fan
@ 2015-08-17 8:57 ` Stefano Babic
2015-08-24 7:46 ` Stefano Babic
1 sibling, 0 replies; 3+ messages in thread
From: Stefano Babic @ 2015-08-17 8:57 UTC (permalink / raw)
To: u-boot
On 17/08/2015 10:12, Peng Fan wrote:
> Enable CONFIG_SPL_FAT_SUPPORT to load u-boot.img from FAT partition.
>
> Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
> ---
> include/configs/mx6sxsabresd.h | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h
> index 848bdcd..74d04a0 100644
> --- a/include/configs/mx6sxsabresd.h
> +++ b/include/configs/mx6sxsabresd.h
> @@ -15,6 +15,7 @@
> #ifdef CONFIG_SPL
> #define CONFIG_SPL_LIBCOMMON_SUPPORT
> #define CONFIG_SPL_MMC_SUPPORT
> +#define CONFIG_SPL_FAT_SUPPORT
> #include "imx6_spl.h"
> #endif
>
>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 3+ messages in thread
* [U-Boot] [PATCH] imx: mx6sxsabresd: enable CONFIG_SPL_FAT_SUPPORT
2015-08-17 8:12 [U-Boot] [PATCH] imx: mx6sxsabresd: enable CONFIG_SPL_FAT_SUPPORT Peng Fan
2015-08-17 8:57 ` Stefano Babic
@ 2015-08-24 7:46 ` Stefano Babic
1 sibling, 0 replies; 3+ messages in thread
From: Stefano Babic @ 2015-08-24 7:46 UTC (permalink / raw)
To: u-boot
On 17/08/2015 10:12, Peng Fan wrote:
> Enable CONFIG_SPL_FAT_SUPPORT to load u-boot.img from FAT partition.
>
> Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
> ---
> include/configs/mx6sxsabresd.h | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h
> index 848bdcd..74d04a0 100644
> --- a/include/configs/mx6sxsabresd.h
> +++ b/include/configs/mx6sxsabresd.h
> @@ -15,6 +15,7 @@
> #ifdef CONFIG_SPL
> #define CONFIG_SPL_LIBCOMMON_SUPPORT
> #define CONFIG_SPL_MMC_SUPPORT
> +#define CONFIG_SPL_FAT_SUPPORT
> #include "imx6_spl.h"
> #endif
>
>
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2015-08-24 7:46 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-08-17 8:12 [U-Boot] [PATCH] imx: mx6sxsabresd: enable CONFIG_SPL_FAT_SUPPORT Peng Fan
2015-08-17 8:57 ` Stefano Babic
2015-08-24 7:46 ` Stefano Babic
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox