[U-Boot] [PATCH] ARM: at91: sama5d3xek: initialized a variable:ek_name in U-Boot

[Josh Wu <josh.wu@atmel.com>]

Hi, Andreas

Any feedback for this patch? Thanks.

Best Regards,
Josh Wu

On 6/17/2015 6:56 PM, Josh Wu wrote:
> Then we can use this ek_name variable to load corresponding dtb file in
> mmc boot.
>
> Also we change the mmc boot command to load zImage as this format is
> prefered.
>
> Signed-off-by: Josh Wu <josh.wu@atmel.com>
> ---
>
>   board/atmel/sama5d3xek/sama5d3xek.c | 21 +++++++++++++++++++++
>   include/configs/sama5d3xek.h        |  7 +++++--
>   2 files changed, 26 insertions(+), 2 deletions(-)
>
> diff --git a/board/atmel/sama5d3xek/sama5d3xek.c b/board/atmel/sama5d3xek/sama5d3xek.c
> index cf6ed8b..8408b2b 100644
> --- a/board/atmel/sama5d3xek/sama5d3xek.c
> +++ b/board/atmel/sama5d3xek/sama5d3xek.c
> @@ -15,6 +15,7 @@
>   #include <asm/arch/gpio.h>
>   #include <asm/arch/clk.h>
>   #include <lcd.h>
> +#include <linux/ctype.h>
>   #include <atmel_hlcdc.h>
>   #include <atmel_mci.h>
>   #include <phy.h>
> @@ -369,6 +370,26 @@ void spi_cs_deactivate(struct spi_slave *slave)
>   }
>   #endif /* CONFIG_ATMEL_SPI */
>   
> +#ifdef CONFIG_BOARD_LATE_INIT
> +int board_late_init(void)
> +{
> +#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
> +	const char *BOARD_EK_NAME = "ek_name";
> +	const int MAX_STR_LEN = 32;
> +	char name[MAX_STR_LEN], *p;
> +	int i;
> +
> +	strncpy(name, get_cpu_name(), MAX_STR_LEN);
> +	for (i = 0, p = name; *p != '\0' || i < MAX_STR_LEN; i++, p++)
> +		*p = tolower(*p);
> +
> +	strcat(name, "ek");
> +	setenv(BOARD_EK_NAME, name);
> +#endif
> +	return 0;
> +}
> +#endif
> +
>   /* SPL */
>   #ifdef CONFIG_SPL_BUILD
>   void spl_board_init(void)
> diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h
> index d933a9e..344ae9c 100644
> --- a/include/configs/sama5d3xek.h
> +++ b/include/configs/sama5d3xek.h
> @@ -19,6 +19,9 @@
>    */
>   #include "at91-sama5_common.h"
>   
> +#define CONFIG_BOARD_LATE_INIT
> +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
> +
>   /* serial console */
>   #define CONFIG_ATMEL_USART
>   #define CONFIG_USART_BASE		ATMEL_BASE_DBGU
> @@ -179,8 +182,8 @@
>   #define FAT_ENV_FILE		"uboot.env"
>   #define FAT_ENV_DEVICE_AND_PART	"0"
>   #define CONFIG_ENV_SIZE		0x4000
> -#define CONFIG_BOOTCOMMAND	"fatload mmc 0:1 0x21000000 dtb; " \
> -				"fatload mmc 0:1 0x22000000 uImage; " \
> +#define CONFIG_BOOTCOMMAND	"fatload mmc 0:1 0x21000000 ${ek_name}.dtb; " \
> +				"fatload mmc 0:1 0x22000000 zImage; " \
>   				"bootm 0x22000000 - 0x21000000"
>   #else
>   #define CONFIG_ENV_IS_NOWHERE