From: Stefano Babic <sbabic@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V2 5/5] imx-common: consolidate macros and prototypes into sys_proto.h
Date: Sun, 23 Aug 2015 17:24:03 +0200 [thread overview]
Message-ID: <55D9E593.5010208@denx.de> (raw)
In-Reply-To: <1439434534-18500-5-git-send-email-Peng.Fan@freescale.com>
On 13/08/2015 04:55, Peng Fan wrote:
> Move most macro definitions and prototypes into
> "arch/arm/include/asm/imx-common/sys_proto.h" to avoid duplicated
> function prototypes and marco definitions for different i.MX SoCs.
>
> This patch do not remove the sys_proto.h for different i.MX SoCs,
> because we need to modify lots of driver code and others. This patch
> remove duplicated macros and prototypes and incude "sys_proto.h"
> of imx-common for each sys_proto.h of different i.MX platforms.
> Then later we should avoid add stuff in sys_proto.h of each platform,
> and modify driver to include common sys_proto.h.
>
> Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
> Cc: Stefano Babic <sbabic@denx.de>
> Reviewed-by: Stefano Babic <sbabic@denx.de>
> ---
>
> Changes v2:
> Fix mx35 build error.
>
> arch/arm/include/asm/arch-mx31/sys_proto.h | 7 ++---
> arch/arm/include/asm/arch-mx35/sys_proto.h | 12 ++++----
> arch/arm/include/asm/arch-mx5/sys_proto.h | 22 +-------------
> arch/arm/include/asm/arch-mx6/sys_proto.h | 45 +---------------------------
> arch/arm/include/asm/arch-mxs/sys_proto.h | 15 ++--------
> arch/arm/include/asm/imx-common/sys_proto.h | 46 +++++++++++++++++++++++++++++
> 6 files changed, 60 insertions(+), 87 deletions(-)
> create mode 100644 arch/arm/include/asm/imx-common/sys_proto.h
>
> diff --git a/arch/arm/include/asm/arch-mx31/sys_proto.h b/arch/arm/include/asm/arch-mx31/sys_proto.h
> index 1626442..674b25c 100644
> --- a/arch/arm/include/asm/arch-mx31/sys_proto.h
> +++ b/arch/arm/include/asm/arch-mx31/sys_proto.h
> @@ -5,10 +5,10 @@
> * SPDX-License-Identifier: GPL-2.0+
> */
>
> -#ifndef _SYS_PROTO_H_
> -#define _SYS_PROTO_H_
> +#ifndef _MX31_SYS_PROTO_H_
> +#define _MX31_SYS_PROTO_H_
>
> -#include "../arch-imx/cpu.h"
> +#include <asm/imx-common/sys_proto.h>
>
> struct mxc_weimcs {
> u32 upper;
> @@ -18,5 +18,4 @@ struct mxc_weimcs {
>
> void mxc_setup_weimcs(int cs, const struct mxc_weimcs *weimcs);
> int mxc_mmc_init(bd_t *bis);
> -u32 get_cpu_rev(void);
> #endif
> diff --git a/arch/arm/include/asm/arch-mx35/sys_proto.h b/arch/arm/include/asm/arch-mx35/sys_proto.h
> index 35c0352..0979fda 100644
> --- a/arch/arm/include/asm/arch-mx35/sys_proto.h
> +++ b/arch/arm/include/asm/arch-mx35/sys_proto.h
> @@ -5,12 +5,12 @@
> * SPDX-License-Identifier: GPL-2.0+
> */
>
> -#ifndef _SYS_PROTO_H_
> -#define _SYS_PROTO_H_
> +#ifndef _MX35_SYS_PROTO_H_
> +#define _MX35_SYS_PROTO_H_
>
> -u32 get_cpu_rev(void);
> -void mx3_setup_sdram_bank(u32 start_address, u32 ddr2_config,
> - u32 row, u32 col, u32 dsize, u32 refresh);
> -#define is_soc_rev(rev) ((get_cpu_rev() & 0xFF) - rev)
> +#include <asm/imx-common/sys_proto.h>
> +
> +void mx3_setup_sdram_bank(u32 start_address, u32 ddr2_config, u32 row,
> + u32 col, u32 dsize, u32 refresh);
>
> #endif
> diff --git a/arch/arm/include/asm/arch-mx5/sys_proto.h b/arch/arm/include/asm/arch-mx5/sys_proto.h
> index b06c77f..16c9b76 100644
> --- a/arch/arm/include/asm/arch-mx5/sys_proto.h
> +++ b/arch/arm/include/asm/arch-mx5/sys_proto.h
> @@ -5,24 +5,4 @@
> * SPDX-License-Identifier: GPL-2.0+
> */
>
> -#ifndef _SYS_PROTO_H_
> -#define _SYS_PROTO_H_
> -
> -#include "../arch-imx/cpu.h"
> -
> -#define is_soc_rev(rev) ((get_cpu_rev() & 0xFF) - rev)
> -u32 get_cpu_rev(void);
> -unsigned imx_ddr_size(void);
> -void sdelay(unsigned long);
> -void set_chipselect_size(int const);
> -
> -/*
> - * Initializes on-chip ethernet controllers.
> - * to override, implement board_eth_init()
> - */
> -
> -int fecmxc_initialize(bd_t *bis);
> -u32 get_ahb_clk(void);
> -u32 get_periph_clk(void);
> -
> -#endif
> +#include <asm/imx-common/sys_proto.h>
> diff --git a/arch/arm/include/asm/arch-mx6/sys_proto.h b/arch/arm/include/asm/arch-mx6/sys_proto.h
> index eee8ca8..16c9b76 100644
> --- a/arch/arm/include/asm/arch-mx6/sys_proto.h
> +++ b/arch/arm/include/asm/arch-mx6/sys_proto.h
> @@ -5,47 +5,4 @@
> * SPDX-License-Identifier: GPL-2.0+
> */
>
> -#ifndef _SYS_PROTO_H_
> -#define _SYS_PROTO_H_
> -
> -#include <asm/imx-common/regs-common.h>
> -#include "../arch-imx/cpu.h"
> -
> -#define soc_rev() (get_cpu_rev() & 0xFF)
> -#define is_soc_rev(rev) (soc_rev() == rev)
> -
> -u32 get_nr_cpus(void);
> -u32 get_cpu_rev(void);
> -u32 get_cpu_speed_grade_hz(void);
> -u32 get_cpu_temp_grade(int *minc, int *maxc);
> -
> -/* returns MXC_CPU_ value */
> -#define cpu_type(rev) (((rev) >> 12) & 0xff)
> -
> -/* both macros return/take MXC_CPU_ constants */
> -#define get_cpu_type() (cpu_type(get_cpu_rev()))
> -#define is_cpu_type(cpu) (get_cpu_type() == cpu)
> -
> -const char *get_imx_type(u32 imxtype);
> -unsigned imx_ddr_size(void);
> -void set_chipselect_size(int const);
> -
> -#define is_mx6dqp() (is_cpu_type(MXC_CPU_MX6QP) || is_cpu_type(MXC_CPU_MX6DP))
> -
> -/*
> - * Initializes on-chip ethernet controllers.
> - * to override, implement board_eth_init()
> - */
> -
> -int fecmxc_initialize(bd_t *bis);
> -u32 get_ahb_clk(void);
> -u32 get_periph_clk(void);
> -
> -int mxs_reset_block(struct mxs_register_32 *reg);
> -int mxs_wait_mask_set(struct mxs_register_32 *reg,
> - uint32_t mask,
> - unsigned int timeout);
> -int mxs_wait_mask_clr(struct mxs_register_32 *reg,
> - uint32_t mask,
> - unsigned int timeout);
> -#endif
> +#include <asm/imx-common/sys_proto.h>
> diff --git a/arch/arm/include/asm/arch-mxs/sys_proto.h b/arch/arm/include/asm/arch-mxs/sys_proto.h
> index d6e9fdb..20ff101 100644
> --- a/arch/arm/include/asm/arch-mxs/sys_proto.h
> +++ b/arch/arm/include/asm/arch-mxs/sys_proto.h
> @@ -7,19 +7,10 @@
> * SPDX-License-Identifier: GPL-2.0+
> */
>
> -#ifndef __SYS_PROTO_H__
> -#define __SYS_PROTO_H__
> +#ifndef __MXS_SYS_PROTO_H__
> +#define __MXS_SYS_PROTO_H__
>
> -#include <asm/imx-common/regs-common.h>
> -#include <../arch-imx/cpu.h>
> -
> -int mxs_reset_block(struct mxs_register_32 *reg);
> -int mxs_wait_mask_set(struct mxs_register_32 *reg,
> - uint32_t mask,
> - unsigned int timeout);
> -int mxs_wait_mask_clr(struct mxs_register_32 *reg,
> - uint32_t mask,
> - unsigned int timeout);
> +#include <asm/imx-common/sys_proto.h>
>
> int mxsmmc_initialize(bd_t *bis, int id, int (*wp)(int), int (*cd)(int));
>
> diff --git a/arch/arm/include/asm/imx-common/sys_proto.h b/arch/arm/include/asm/imx-common/sys_proto.h
> new file mode 100644
> index 0000000..6954ee9
> --- /dev/null
> +++ b/arch/arm/include/asm/imx-common/sys_proto.h
> @@ -0,0 +1,46 @@
> +/*
> + * (C) Copyright 2009
> + * Stefano Babic, DENX Software Engineering, sbabic at denx.de.
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#ifndef _SYS_PROTO_H_
> +#define _SYS_PROTO_H_
> +
> +#include <asm/imx-common/regs-common.h>
> +#include <common.h>
> +#include "../arch-imx/cpu.h"
> +
> +#define soc_rev() (get_cpu_rev() & 0xFF)
> +#define is_soc_rev(rev) (soc_rev() == rev)
> +
> +/* returns MXC_CPU_ value */
> +#define cpu_type(rev) (((rev) >> 12) & 0xff)
> +/* both macros return/take MXC_CPU_ constants */
> +#define get_cpu_type() (cpu_type(get_cpu_rev()))
> +#define is_cpu_type(cpu) (get_cpu_type() == cpu)
> +
> +#define is_mx6dqp() (is_cpu_type(MXC_CPU_MX6QP) || is_cpu_type(MXC_CPU_MX6DP))
> +
> +u32 get_nr_cpus(void);
> +u32 get_cpu_rev(void);
> +u32 get_cpu_speed_grade_hz(void);
> +u32 get_cpu_temp_grade(int *minc, int *maxc);
> +const char *get_imx_type(u32 imxtype);
> +u32 imx_ddr_size(void);
> +void sdelay(unsigned long);
> +void set_chipselect_size(int const);
> +
> +/*
> + * Initializes on-chip ethernet controllers.
> + * to override, implement board_eth_init()
> + */
> +int fecmxc_initialize(bd_t *bis);
> +u32 get_ahb_clk(void);
> +u32 get_periph_clk(void);
> +
> +int mxs_reset_block(struct mxs_register_32 *reg);
> +int mxs_wait_mask_set(struct mxs_register_32 *reg, u32 mask, u32 timeout);
> +int mxs_wait_mask_clr(struct mxs_register_32 *reg, u32 mask, u32 timeout);
> +#endif
>
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
next prev parent reply other threads:[~2015-08-23 15:24 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-13 2:55 [U-Boot] [PATCH V2 1/5] imx: add cpu type for i.MX2 and i.MX3 Peng Fan
2015-08-13 2:55 ` [U-Boot] [PATCH V2 2/5] imx: mx27 implement get_cpu_rev Peng Fan
2015-08-23 15:23 ` Stefano Babic
2015-08-13 2:55 ` [U-Boot] [PATCH V2 3/5] imx: mx31 use new formula for get_cpu_rev Peng Fan
2015-08-23 15:23 ` Stefano Babic
2015-08-13 2:55 ` [U-Boot] [PATCH V2 4/5] imx: mxs: reimplement get_cpu_rev Peng Fan
2015-08-23 15:23 ` Stefano Babic
2015-08-13 2:55 ` [U-Boot] [PATCH V2 5/5] imx-common: consolidate macros and prototypes into sys_proto.h Peng Fan
2015-08-23 15:24 ` Stefano Babic [this message]
2015-08-23 15:23 ` [U-Boot] [PATCH V2 1/5] imx: add cpu type for i.MX2 and i.MX3 Stefano Babic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55D9E593.5010208@denx.de \
--to=sbabic@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox