public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Christophe Ricard <christophe.ricard@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 16/28] dm: tpm: Convert the TPM command and library to driver model
Date: Mon, 24 Aug 2015 22:21:23 +0200	[thread overview]
Message-ID: <55DB7CC3.8080503@gmail.com> (raw)
In-Reply-To: <1440289904-31280-17-git-send-email-sjg@chromium.org>

Hi Simon,

This one looks good to me. Actually, i think atmel driver is trivial to move to driver model following the current TPM class.
I would assume this will be changed very soon.

Acked-by: Christophe Ricard<christophe-h.ricard@st.com>

Best Regards
Christophe

On 23/08/2015 02:31, Simon Glass wrote:
> Add driver model support to the TPM command and the TPM library. Both
> support only a single TPM at present.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
>
> Changes in v2:
> - Correct error checking code in tpm_sendrecv_command()
> - Use tpm_ prefix instead of tis_ for TPM functions
>
>   common/cmd_tpm.c | 26 ++++++++++++++++++++++++++
>   include/tpm.h    |  2 +-
>   lib/tpm.c        | 31 ++++++++++++++++++++++++++-----
>   3 files changed, 53 insertions(+), 6 deletions(-)
>
> diff --git a/common/cmd_tpm.c b/common/cmd_tpm.c
> index 0294952..bad2006 100644
> --- a/common/cmd_tpm.c
> +++ b/common/cmd_tpm.c
> @@ -6,6 +6,7 @@
>   
>   #include <common.h>
>   #include <command.h>
> +#include <dm.h>
>   #include <malloc.h>
>   #include <tpm.h>
>   #include <asm/unaligned.h>
> @@ -438,6 +439,21 @@ TPM_COMMAND_NO_ARG(tpm_force_clear)
>   TPM_COMMAND_NO_ARG(tpm_physical_enable)
>   TPM_COMMAND_NO_ARG(tpm_physical_disable)
>   
> +#ifdef CONFIG_DM_TPM
> +static int get_tpm(struct udevice **devp)
> +{
> +	int rc;
> +
> +	rc = uclass_first_device(UCLASS_TPM, devp);
> +	if (rc) {
> +		printf("Could not find TPM (ret=%d)\n", rc);
> +		return CMD_RET_FAILURE;
> +	}
> +
> +	return 0;
> +}
> +#endif
> +
>   static int do_tpm_raw_transfer(cmd_tbl_t *cmdtp, int flag,
>   		int argc, char * const argv[])
>   {
> @@ -452,7 +468,17 @@ static int do_tpm_raw_transfer(cmd_tbl_t *cmdtp, int flag,
>   		return CMD_RET_FAILURE;
>   	}
>   
> +#ifdef CONFIG_DM_TPM
> +	struct udevice *dev;
> +
> +	rc = get_tpm(&dev);
> +	if (rc)
> +		return rc;
> +
> +	rc = tpm_xfer(dev, command, count, response, &response_length);
> +#else
>   	rc = tis_sendrecv(command, count, response, &response_length);
> +#endif
>   	free(command);
>   	if (!rc) {
>   		puts("tpm response:\n");
> diff --git a/include/tpm.h b/include/tpm.h
> index e4472d3..445952b 100644
> --- a/include/tpm.h
> +++ b/include/tpm.h
> @@ -349,7 +349,7 @@ int tpm_xfer(struct udevice *dev, const uint8_t *sendbuf, size_t send_size,
>    *
>    * @return 0 on success, non-0 on error.
>    */
> -uint32_t tpm_init(void);
> +int tpm_init(void);
>   
>   /**
>    * Issue a TPM_Startup command.
> diff --git a/lib/tpm.c b/lib/tpm.c
> index d9789b0..19bf0b5 100644
> --- a/lib/tpm.c
> +++ b/lib/tpm.c
> @@ -6,10 +6,11 @@
>    */
>   
>   #include <common.h>
> -#include <stdarg.h>
> -#include <u-boot/sha1.h>
> +#include <dm.h>
> +#include <tis.h>
>   #include <tpm.h>
>   #include <asm/unaligned.h>
> +#include <u-boot/sha1.h>
>   
>   /* Internal error of TPM command library */
>   #define TPM_LIB_ERROR	((uint32_t)~0u)
> @@ -240,9 +241,20 @@ static uint32_t tpm_sendrecv_command(const void *command,
>   		response = response_buffer;
>   		response_length = sizeof(response_buffer);
>   	}
> +#ifdef CONFIG_DM_TPM
> +	struct udevice *dev;
> +	int ret;
> +
> +	ret = uclass_first_device(UCLASS_TPM, &dev);
> +	if (ret)
> +		return ret;
> +	err = tpm_xfer(dev, command, tpm_command_size(command),
> +		       response, &response_length);
> +#else
>   	err = tis_sendrecv(command, tpm_command_size(command),
>   			response, &response_length);
> -	if (err)
> +#endif
> +	if (err < 0)
>   		return TPM_LIB_ERROR;
>   	if (size_ptr)
>   		*size_ptr = response_length;
> @@ -250,15 +262,24 @@ static uint32_t tpm_sendrecv_command(const void *command,
>   	return tpm_return_code(response);
>   }
>   
> -uint32_t tpm_init(void)
> +int tpm_init(void)
>   {
> -	uint32_t err;
> +	int err;
>   
> +#ifdef CONFIG_DM_TPM
> +	struct udevice *dev;
> +
> +	err = uclass_first_device(UCLASS_TPM, &dev);
> +	if (err)
> +		return err;
> +	return tpm_open(dev);
> +#else
>   	err = tis_init();
>   	if (err)
>   		return err;
>   
>   	return tis_open();
> +#endif
>   }
>   
>   uint32_t tpm_startup(enum tpm_startup_type mode)

  reply	other threads:[~2015-08-24 20:21 UTC|newest]

Thread overview: 81+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-08-23  0:31 [U-Boot] [PATCH v2 00/28] dm: Convert TPM drivers to driver model Simon Glass
2015-08-23  0:31 ` [U-Boot] [PATCH v2 01/28] tpm: Remove old pre-driver-model I2C code Simon Glass
2015-08-24  4:50   ` Heiko Schocher
2015-08-24  4:52     ` Simon Glass
2015-08-24  5:15       ` Heiko Schocher
2015-08-30 22:42         ` Simon Glass
2015-08-23  0:31 ` [U-Boot] [PATCH v2 02/28] tpm: Drop two unused options Simon Glass
2015-08-30 22:42   ` Simon Glass
2015-08-23  0:31 ` [U-Boot] [PATCH v2 03/28] tpm: Add Kconfig options for TPMs Simon Glass
2015-08-24 20:24   ` Christophe Ricard
2015-08-30 22:42     ` Simon Glass
2015-08-23  0:31 ` [U-Boot] [PATCH v2 04/28] tpm: Convert board config TPM options to Kconfig Simon Glass
2015-08-24 20:20   ` Christophe Ricard
2015-08-30 22:43     ` Simon Glass
2015-08-23  0:31 ` [U-Boot] [PATCH v2 05/28] tpm: Convert drivers to use SPDX Simon Glass
2015-08-30 22:43   ` Simon Glass
2015-08-23  0:31 ` [U-Boot] [PATCH v2 06/28] tpm: Move the I2C TPM code into one file Simon Glass
2015-08-24 20:24   ` Christophe Ricard
2015-08-25  4:13     ` Simon Glass
2015-08-25 18:38       ` Christophe Ricard
2015-08-30 22:43         ` Simon Glass
2015-08-23  0:31 ` [U-Boot] [PATCH v2 07/28] tpm: tpm_tis_i2c: Drop unnecessary methods Simon Glass
2015-08-30 22:43   ` Simon Glass
2015-08-23  0:31 ` [U-Boot] [PATCH v2 08/28] tpm: tpm_tis_i2c: Drop struct tpm_vendor_specific Simon Glass
2015-08-30 22:43   ` Simon Glass
2015-08-23  0:31 ` [U-Boot] [PATCH v2 09/28] tpm: tpm_tis_i2c: Merge struct tpm_dev into tpm_chip Simon Glass
2015-08-30 22:43   ` Simon Glass
2015-08-23  0:31 ` [U-Boot] [PATCH v2 10/28] tpm: tpm_tis_i2c: Merge struct tpm " Simon Glass
2015-08-30 22:43   ` Simon Glass
2015-08-23  0:31 ` [U-Boot] [PATCH v2 11/28] tpm: tpm_tis_i2c: Move definitions into the header file Simon Glass
2015-08-30 22:43   ` Simon Glass
2015-08-23  0:31 ` [U-Boot] [PATCH v2 12/28] tpm: tpm_tis_i2c: Simplify init code Simon Glass
2015-08-24 20:20   ` Christophe Ricard
2015-08-30 22:43     ` Simon Glass
2015-08-23  0:31 ` [U-Boot] [PATCH v2 13/28] tpm: tpm_tis_i2c: Use a consistent tpm_tis_i2c_ prefix Simon Glass
2015-08-30 22:43   ` Simon Glass
2015-08-23  0:31 ` [U-Boot] [PATCH v2 14/28] tpm: tpm_tis_i2c: Tidy up delays Simon Glass
2015-08-30 22:43   ` Simon Glass
2015-08-23  0:31 ` [U-Boot] [PATCH v2 15/28] dm: tpm: Add a uclass for Trusted Platform Modules Simon Glass
2015-08-24 20:21   ` Christophe Ricard
2015-08-30 22:43     ` Simon Glass
2015-08-23  0:31 ` [U-Boot] [PATCH v2 16/28] dm: tpm: Convert the TPM command and library to driver model Simon Glass
2015-08-24 20:21   ` Christophe Ricard [this message]
2015-08-30 22:43     ` Simon Glass
2015-08-23  0:31 ` [U-Boot] [PATCH v2 17/28] dm: i2c: Add a command to adjust the offset length Simon Glass
2015-08-24 20:21   ` Christophe Ricard
2015-08-30 22:43     ` Simon Glass
2015-08-23  0:31 ` [U-Boot] [PATCH v2 18/28] tpm: Report tpm errors on the command line Simon Glass
2015-08-24 20:21   ` Christophe Ricard
2015-08-30 22:43     ` Simon Glass
2015-08-23  0:31 ` [U-Boot] [PATCH v2 19/28] dm: tpm: sandbox: Convert TPM driver to driver model Simon Glass
2015-08-30 22:43   ` Simon Glass
2015-08-23  0:31 ` [U-Boot] [PATCH v2 20/28] tpm: Check that parse_byte_string() has data to parse Simon Glass
2015-08-24 20:22   ` Christophe Ricard
2015-08-25  4:13     ` Simon Glass
2015-08-25 18:40       ` Christophe Ricard
2015-08-30 22:43         ` Simon Glass
2015-08-23  0:31 ` [U-Boot] [PATCH v2 21/28] exynos: x86: dts: Add tpm nodes to the device tree for Chrome OS devices Simon Glass
2015-08-24 20:22   ` Christophe Ricard
2015-08-30 22:43     ` Simon Glass
2015-08-23  0:31 ` [U-Boot] [PATCH v2 22/28] dm: tpm: Convert I2C driver to driver model Simon Glass
2015-08-24 20:22   ` Christophe Ricard
2015-08-30 22:44     ` Simon Glass
2015-08-23  0:31 ` [U-Boot] [PATCH v2 23/28] dm: tpm: Convert LPC " Simon Glass
2015-08-24 20:23   ` Christophe Ricard
2015-08-30 22:44     ` Simon Glass
2015-08-23  0:31 ` [U-Boot] [PATCH v2 24/28] tpm: Add a 'tpm info' command Simon Glass
2015-08-30 22:44   ` Simon Glass
2015-08-23  0:31 ` [U-Boot] [PATCH v2 25/28] tpm: Add functions to access flags and permissions Simon Glass
2015-08-24 20:23   ` Christophe Ricard
2015-08-30 22:44     ` Simon Glass
2015-08-23  0:31 ` [U-Boot] [PATCH v2 26/28] dm: tpm: Add a 'tpmtest' command Simon Glass
2015-08-24 20:23   ` Christophe Ricard
2015-08-30 22:44     ` Simon Glass
2015-08-23  0:31 ` [U-Boot] [PATCH v2 27/28] tpm: Enable 'tpmtest' command for Chrome OS boards with TPMs Simon Glass
2015-08-24 20:23   ` Christophe Ricard
2015-08-30 22:44     ` Simon Glass
2015-08-23  0:31 ` [U-Boot] [PATCH v2 28/28] tegra: nyan: Enable TPM command and driver Simon Glass
2015-08-30 22:44   ` Simon Glass
2015-08-24 20:20 ` [U-Boot] [PATCH v2 00/28] dm: Convert TPM drivers to driver model Christophe Ricard
2015-08-25  4:13   ` Simon Glass

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=55DB7CC3.8080503@gmail.com \
    --to=christophe.ricard@gmail.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox