From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hannes Schmelzer Date: Tue, 25 Aug 2015 14:13:17 +0200 Subject: [U-Boot] commit 620776d causes TFTP error: 'Unsupported option(s) requested' (8) In-Reply-To: References: Message-ID: <55DC5BDD.5040307@schmelzer.or.at> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi, i've same problem. Running tftp-hpa on Linux Mint 17. cat /etc/default/tftpd-hpa # /etc/default/tftpd-hpa RUN_DAEMON="yes" TFTP_USERNAME="tftp" TFTP_DIRECTORY="/tftpboot/tseries" TFTP_ADDRESS="0.0.0.0:69" TFTP_OPTIONS="-l -s" best regards, Hannes On 25.08.2015 09:40, Bin Meng wrote: > Hi Joe, > > On Tue, Aug 25, 2015 at 12:24 PM, Joe Hershberger > wrote: >> Hi Bin, >> >> On Mon, Aug 24, 2015 at 11:05 PM, Bin Meng wrote: >>> Hi Joe, >>> >>> On Tue, Aug 25, 2015 at 11:42 AM, Joe Hershberger >>> wrote: >>>> Hi Bin, >>>> >>>> On Mon, Aug 24, 2015 at 9:25 PM, Bin Meng wrote: >>>>> Hi, >>>>> >>>>> With latest u-boot/master, TFTP is seriously broken. >>>>> >>>>> => tftp 100000 bzImage >>>>> Speed: 100, full duplex >>>>> Using pch_gbe device >>>>> TFTP from server 10.10.0.8; our IP address is 10.10.0.100; sending >>>>> through gateway 10.10.0.1 >>>>> Filename 'bzImage'. >>>>> Load address: 0x100000 >>>>> Loading: T >>>>> TFTP error: 'Unsupported option(s) requested' (8) >>>>> Starting again >>>> I'm guessing you are having an issue that the TFTP server you are >>>> using for some reason does not allow a timeout as small as 10 ms. What >>>> server are you testing against? Can you experiment and find the lowest >>>> that it accepts? Maybe there is a compromise we can reach that still >>>> works with most (all?) servers and also improves the behavior in a >>>> lossy environment. >>> I am using a CentOS server, with /etc/xinetd.d/tftp configuration below. >>> >>> service tftp >>> { >>> socket_type = dgram >>> protocol = udp >>> wait = yes >>> user = root >>> server = /usr/sbin/in.tftpd >>> server_args = -s /tftpboot >>> disable = no >>> per_source = 11 >>> cps = 100 2 >>> flags = IPv4 >>> } >>> >>> I don't see an entry to change timeout settings. >> I didn't mean to change the server settings; I meant can you adjust >> the U-Boot code until your server doesn't reject the option? >> > I would like to revert this commit before we find a solution. Even if > I find a proper value to get tftp work again in my network > environment, we don't know if this commit breaks someone else's board. > After all, this timeout value has been there for years (?), and I > believe it is a safe value for all the boards that are actively > maintained. > > [snip] > > Regards, > Bin > _______________________________________________ > U-Boot mailing list > U-Boot at lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot > >