From: Hannes Schmelzer <hannes@schmelzer.or.at>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2] omap-common: SYS_BOOT fallback logic correction and support for more devices
Date: Thu, 27 Aug 2015 11:28:06 +0200 [thread overview]
Message-ID: <55DED826.1090306@schmelzer.or.at> (raw)
In-Reply-To: <1440665169-8070-1-git-send-email-contact@paulk.fr>
On 2015-08-27 10:46, Paul Kocialkowski wrote:
> The SYS_BOOT-based fallback shouldn't only check for one of the conditions of
> use and then let the switch/case handle each boot device without enforcing the
> conditions for each type of boot device again.
>
> For instance, this behaviour would trigger the fallback for UART when
> BOOT_DEVICE_UART is defined, CONFIG_SPL_YMODEM_SUPPORT is enabled (which should
> be a show-stopper) and e.g. BOOT_DEVICE_USB is enabled and not
> CONFIG_SPL_USB_SUPPORT.
> Separating the logic for USB and UART solves this.
>
> In addition, this adds support for more peripheral devices (USBETH and CPGMAC)
> to the fallback mechanism. Note that the USBETH boot device should always be
> different from the USB boot device (each should match a different bootrom
> handoff case).
>
> Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
> ---
Very well. Everything now works fine.
best regards,
Hannes
Acked-by: Hannes Schmelzer <oe5hpm@oevsv.at>
Tested-by: Hannes Schmelzer <oe5hpm@oevsv.at>
next prev parent reply other threads:[~2015-08-27 9:28 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-27 8:46 [U-Boot] [PATCH v2] omap-common: SYS_BOOT fallback logic correction and support for more devices Paul Kocialkowski
2015-08-27 9:28 ` Hannes Schmelzer [this message]
2015-08-28 21:03 ` [U-Boot] [U-Boot, " Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55DED826.1090306@schmelzer.or.at \
--to=hannes@schmelzer.or.at \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox