From mboxrd@z Thu Jan 1 00:00:00 1970 From: Przemyslaw Marczak Date: Mon, 31 Aug 2015 14:17:25 +0200 Subject: [U-Boot] [PATCH 0/7] Add board detection for Odroid XU3 / XU3Lite / XU4 In-Reply-To: References: <1440770374-11501-1-git-send-email-p.marczak@samsung.com> Message-ID: <55E445D5.5010901@samsung.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello Anand, On 08/30/2015 09:03 PM, Anand Moon wrote: > hi Przemyslaw, > > On 28 August 2015 at 19:29, Przemyslaw Marczak > wrote: > > This patchset adds: > > - define the CPU name for Chromebook Peach Pi as Exynos5800 > > - set the cpu id of Exynos5422 to 0x5422 > > - S2MPS11 PMIC I/O driver > > - Exynos5420-compatible (9-channel, 12-bit) ADC driver > > - board detection for Odroid XU3 / XU3lite / XU4 > > > > This was tested on Odroid XU3 and XU3 Lite, without the XU4, > > but I'm waiting for reply from the Odroid forum users. > > > > Tested with buildman for samsung. > > > > Available on github: > > https://github.com/bobenstein/u-boot/tree/xu3-patchset-test > > > > Przemyslaw Marczak (7): > > s5p: cpu_info: use defined CPU name if available > > peach-pi: define CPU name for SoC Exynos5800 > > Exynos5422/5800: set cpu id to 0x5422 > > dm: pmic: add s2mps11 PMIC I/O driver > > odroid-xu3: enable s2mps11 PMIC support > > Exynos: add internal ADC driver > > exynos5-dt: add board detection for Odroid XU3/XU3L/XU4. > > > > arch/arm/cpu/armv7/s5p-common/cpu_info.c | 5 ++ > > arch/arm/dts/exynos5422-odroidxu3.dts | 7 ++ > > arch/arm/mach-exynos/Makefile | 1 + > > arch/arm/mach-exynos/adc.c | 83 ++++++++++++++++++++++ > > arch/arm/mach-exynos/clock.c | 16 ++--- > > arch/arm/mach-exynos/clock_init_exynos5.c | 2 +- > > arch/arm/mach-exynos/common_setup.h | 4 +- > > arch/arm/mach-exynos/include/mach/adc.h | 45 ++++++++++++ > > arch/arm/mach-exynos/include/mach/cpu.h | 10 +-- > > arch/arm/mach-exynos/include/mach/gpio.h | 4 +- > > arch/arm/mach-exynos/pinmux.c | 2 +- > > arch/arm/mach-exynos/power.c | 2 +- > > board/samsung/common/exynos5-dt.c | 114 > ++++++++++++++++++++++++++++++ > > configs/odroid-xu3_defconfig | 3 + > > doc/device-tree-bindings/pmic/s2mps11.txt | 17 +++++ > > drivers/power/pmic/Kconfig | 14 ++++ > > drivers/power/pmic/Makefile | 1 + > > drivers/power/pmic/s2mps11.c | 60 ++++++++++++++++ > > include/configs/odroid_xu3.h | 12 ++++ > > include/configs/peach-pi.h | 2 + > > include/power/s2mps11.h | 109 > ++++++++++++++++++++++++++++ > > 21 files changed, 493 insertions(+), 20 deletions(-) > > create mode 100644 arch/arm/mach-exynos/adc.c > > create mode 100644 doc/device-tree-bindings/pmic/s2mps11.txt > > create mode 100644 drivers/power/pmic/s2mps11.c > > create mode 100644 include/power/s2mps11.h > > > > Thanks for these patches. > ? ?? > > > At the last moment I got this to work on my odroidxu3 board. > > One problem I would like to address out is usb smsc95xx ethernet is not > getting started at the boot. > > # usb start /* command failed at the start */ > ------------------------------------------------------------------------------------------------------ > U-Boot 2015.10-rc2-00226-g7dbe336 (Aug 30 2015 - 23:41:27 +0530) for > ODROID-XU3 > > CPU: Exynos5422 @ 800 MHz > Model: Odroid XU3 based on EXYNOS5422 > Board: Odroid XU3 based on EXYNOS5422 > Model: xu3 > DRAM: 2 GiB > MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 > *** Warning - bad CRC, using default environment > > In: serial > Out: serial > Err: serial > Net: No ethernet found. > Hit any key to stop autoboot: 0 > switch to partitions #0, OK > mmc0 is current device > Scanning mmc 0:1... > starting USB... > USB0: USB EHCI 1.00 > USB1: Register 2000140 NbrPorts 2 > Starting the controller > USB XHCI 1.00 > USB2: Register 2000140 NbrPorts 2 > Starting the controller > USB XHCI 1.00 > scanning bus 0 for devices... 1 USB Device(s) found > scanning bus 1 for devices... 1 USB Device(s) found > scanning bus 2 for devices... 1 USB Device(s) found > scanning usb for ethernet devices... 0 Ethernet Device(s) found > No ethernet found. > missing environment variable: pxeuuid > missing environment variable: bootfile > ----------------------------------------------------------------------------------------- > > I will give it a try with latest kernel and let you know how it worked > on Odroid-XU4 / XU4. > > -Anand Moon > > > -- > > 1.9.1 > > Thank you for pointing this, but at present I'm busy with some other work and I don't have too much time for it. Maybe in the next week. Best regards, -- Przemyslaw Marczak Samsung R&D Institute Poland Samsung Electronics p.marczak at samsung.com