[U-Boot] [PATCH V2 2/3] net: fec: do not access reserved register for i.MX6UL

[Stefano Babic <sbabic@denx.de>]

Hi Peng,

On 23/08/2015 17:43, Stefano Babic wrote:
> On 12/08/2015 11:40, Peng Fan wrote:
>> The MIB RAM and FIFO receive start register does not exist on
>> i.MX6UL. Accessing these register will cause enet not work well.
>>
>> Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
>> Signed-off-by: Fugang Duan <B38611@freescale.com>
>> Cc: Joe Hershberger <joe.hershberger@ni.com>
>> Cc: Stefano Babic <sbabic@denx.de>
>> ---
>>
>> Changes v2:
>>  Using runtime check, but not hardcoding "#ifdef".
>>  This patch depends on the runtime checking patch:
>>  https://patchwork.ozlabs.org/patch/505621/.
>>
>>  drivers/net/fec_mxc.c | 14 +++++++++-----
>>  1 file changed, 9 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
>> index c5dcbbb..bff5fd1 100644
>> --- a/drivers/net/fec_mxc.c
>> +++ b/drivers/net/fec_mxc.c
>> @@ -17,6 +17,7 @@
>>  
>>  #include <asm/arch/clock.h>
>>  #include <asm/arch/imx-regs.h>
>> +#include <asm/imx-common/sys_proto.h>
>>  #include <asm/io.h>
>>  #include <asm/errno.h>
>>  #include <linux/compiler.h>
>> @@ -551,12 +552,15 @@ static int fec_init(struct eth_device *dev, bd_t* bd)
>>  	writel(0x00000000, &fec->eth->gaddr2);
>>  
>>  
>> -	/* clear MIB RAM */
>> -	for (i = mib_ptr; i <= mib_ptr + 0xfc; i += 4)
>> -		writel(0, i);
>> +	/* Do not access reserved register for i.MX6UL */
>> +	if (!is_cpu_type(MXC_CPU_MX6UL)) {
>> +		/* clear MIB RAM */
>> +		for (i = mib_ptr; i <= mib_ptr + 0xfc; i += 4)
>> +			writel(0, i);
>>  
>> -	/* FIFO receive start register */
>> -	writel(0x520, &fec->eth->r_fstart);
>> +		/* FIFO receive start register */
>> +		writel(0x520, &fec->eth->r_fstart);
>> +	}
>>  
>>  	/* size and address of each buffer */
>>  	writel(FEC_MAX_PKT_SIZE, &fec->eth->emrbr);
>>
> 

Patch is already applied - however, I have found that this break build
for vf610 boards (they have not a get_cpu_rev()). You can check with the
current u-boot-imx.

Can you take a look, please ?

Thanks,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================