[U-Boot] [PATCH] imx: vf610 add function get_cpu_rev

[Stefano Babic <sbabic@denx.de>]

Hi Peng,

On 01/09/2015 03:40, Peng Fan wrote:
> Since we need to support runtime check for different drivers,
> we need to add get_cpu_rev for vf610.
> 
> This patch only introduce a empty implementation to avoid build errors,
> later more stuff can be added if need to check vf610 cpu types.
> 
> Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
> Cc: Stefano Babic <sbabic@denx.de>
> ---
>  arch/arm/cpu/armv7/vf610/generic.c | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/arch/arm/cpu/armv7/vf610/generic.c b/arch/arm/cpu/armv7/vf610/generic.c
> index 05c401d..bd948cb 100644
> --- a/arch/arm/cpu/armv7/vf610/generic.c
> +++ b/arch/arm/cpu/armv7/vf610/generic.c
> @@ -266,6 +266,17 @@ void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
>  }
>  #endif
>  
> +/*
> + * Empty function
> + * Several drivers use runtime check, which needs get_cpu_rev.
> + * If later we need to do runtime check for vf610, we can add
> + * more stuff here.
> + */
> +u32 get_cpu_rev(void)
> +{
> +	return 0;
> +}
> +
>  #if defined(CONFIG_DISPLAY_CPUINFO)
>  static char *get_reset_cause(void)
>  {
> 

If there is really no way to get the cpu revision from the SOC, I
suggest we use the same approach of MXC_CPU_MX6SOLO with a "dummy" cpu.
Something like :

#define MXC_CPU_VF610           0xF6 /* dummy CPU */

"F6" from vF610, of course, instead of returning 0.

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================