[U-Boot] [PATCH 12/13] sunxi: A13-Olinuxino: Enable the USB OTG controller

[Hans de Goede <hdegoede@redhat.com>]

Hi,

On 31-08-15 16:46, Maxime Ripard wrote:
> The A13-Olinuxino has a mini-USB connector that can be used to power up
> the board and as an OTG connector.
>
> Since we have already some USB host-only ports right beside this one,
> enable it in gadget mode
>
> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> ---
>   configs/A13-OLinuXino_defconfig | 2 ++
>   1 file changed, 2 insertions(+)
>
> diff --git a/configs/A13-OLinuXino_defconfig b/configs/A13-OLinuXino_defconfig
> index 4b4337223ca5..70aa194b91c4 100644
> --- a/configs/A13-OLinuXino_defconfig
> +++ b/configs/A13-OLinuXino_defconfig
> @@ -3,6 +3,7 @@ CONFIG_ARCH_SUNXI=y
>   CONFIG_MACH_SUN5I=y
>   CONFIG_DRAM_CLK=408
>   CONFIG_DRAM_EMR1=0
> +CONFIG_USB0_VBUS_DET="PG1"
>   CONFIG_USB1_VBUS_PIN="PG11"
>   CONFIG_AXP_GPIO=y
>   # CONFIG_VIDEO_HDMI is not set
> @@ -11,6 +12,7 @@ CONFIG_VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH=y
>   CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:16,ri:209,up:22,lo:22,hs:30,vs:1,sync:3,vmode:0"
>   CONFIG_VIDEO_LCD_POWER="AXP0-0"
>   CONFIG_VIDEO_LCD_BL_PWM="PB2"
> +CONFIG_USB_MUSB_SUNXI=y
>   CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino"
>   # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
>   CONFIG_SPL=y

The CONFIG_xxx defines for using MUSB in either host or gadget mode have
changed in v2015.10, looks like you need to rebase this series and fix
this.

Regards,

Hans