[U-Boot] [PATCH 00/13] dm: arm: zynq: Convert serial driver to driver model

[Michal Simek <monstr@monstr.eu>]

On 09/01/2015 01:12 AM, Simon Glass wrote:
> Hi Michal,
> 
> On 31 August 2015 at 08:11, Michal Simek <monstr@monstr.eu> wrote:
>> On 08/29/2015 05:10 PM, Simon Glass wrote:
>>> This series updates the Zynq serial driver to use driver model. Along the
>>> way several problems are fixed:
>>>
>>> - Support for /chosen/stdout-path using an alias
>>> - Fix to fdtgrep which is currently breaking alias building
>>> - Avoid building u-boot-spl-dtb.bin when it is not requested
>>> - Deal with boards which have BSS in SDRAM
>>>
>>> For zynq this series makes a few changes:
>>> - Use the new SPL init procedure, which just involves a few tweaks for zynq
>>> - Add debug UART support
>>> - Move to using a separate device tree instead of embedded
>>>
>>> Only zybo has been tested. Testing on other zynq boards is welcome. They are
>>> all set up roughly the same so I expect only minor problems.
>>>
>>> For some reason zynqmp does not have a device tree, so this series does not
>>> work on that. But that board fails to build on mainline for me anyway so
>>> perhaps nothing is lost. I don't have a board to test with so help on this
>>> would be appreciated!
>>
>> I have no problem to build zynqmp on my PC. Can you please c&p error
>> which you are getting?
> 
> I get this:
> 
> $ buildman zynqmp
> Building current source for 1 boards (1 thread, 32 jobs per thread)
>    aarch64:  +   xilinx_zynqmp_ep
> +      ((u32)(priv->rxbuffers) +
> +       ^
> +   writel((u32)priv->rx_bd, &regs->rxqbase);
> +          ^
> +arch/arm/include/asm/io.h:146:34: note: in definition of macro 'writel'
> + #define writel(v,c) ({ u32 __v = v; __iowmb(); __arch_putl(__v,c); __v; })
> +                                  ^
> +  writel((u32)priv->tx_bd, &regs->txqbase);
> +         ^
> +  priv->tx_bd->addr = (u32)ptr;
> +                      ^
> +  addr = (u32) ptr;
> +  addr = (u32)priv->rxbuffers;
> +   net_process_received_packet((u8 *)addr, frame_len);
> +                               ^
> +  priv->rx_bd = (struct emac_bd *)((u32)bd_space + BD_SEPRN_SPACE);
> +                                   ^
> +                ^
> +  dwc3_flush_cache((int)trb, sizeof(*trb));
> +                   ^
> +  dma_unmap_single((void *)dwc->scratch_addr, dwc->nr_scratch *
> +  dma_unmap_single((void *)req->dma, req->length,
> +    dwc3_flush_cache((int)trb, sizeof(*trb));
> +                     ^
> +   dwc3_flush_cache((int)dwc->ep0_bounce, DWC3_EP0_BOUNCE_SIZE);
> +                    ^
> +  dwc->regs = (int *)(dwc3_dev->base + DWC3_GLOBALS_REGS_START);
> +              ^
> +  debug("%s: dev->in_req->length:%d to_cpy:%d\n", __func__,
> +  ^
> +    dwc3_flush_cache((int)evt->buf, evt->length);
> w+drivers/net/zynq_gem.c: In function 'zynq_gem_init':
> w+drivers/net/zynq_gem.c:330:7: warning: cast from pointer to integer
> of different size [-Wpointer-to-int-cast]
> w+In file included from drivers/net/zynq_gem.c:19:0:
> w+drivers/net/zynq_gem.c:336:10: warning: cast from pointer to integer
> of different size [-Wpointer-to-int-cast]
> w+drivers/net/zynq_gem.c: In function 'zynq_gem_send':
> w+drivers/net/zynq_gem.c:399:9: warning: cast from pointer to integer
> of different size [-Wpointer-to-int-cast]
> w+drivers/net/zynq_gem.c:404:22: warning: cast from pointer to integer
> of different size [-Wpointer-to-int-cast]
> w+drivers/net/zynq_gem.c:409:9: warning: cast from pointer to integer
> of different size [-Wpointer-to-int-cast]
> w+drivers/net/zynq_gem.c:414:9: warning: cast from pointer to integer
> of different size [-Wpointer-to-int-cast]
> w+drivers/net/zynq_gem.c: In function 'zynq_gem_recv':
> w+drivers/net/zynq_gem.c:454:31: warning: cast to pointer from integer
> of different size [-Wint-to-pointer-cast]
> w+drivers/net/zynq_gem.c: In function 'zynq_gem_initialize':
> w+drivers/net/zynq_gem.c:533:35: warning: cast from pointer to integer
> of different size [-Wpointer-to-int-cast]
> w+drivers/net/zynq_gem.c:533:16: warning: cast to pointer from integer
> of different size [-Wint-to-pointer-cast]
> w+drivers/usb/dwc3/ep0.c: In function 'dwc3_ep0_start_trans':
> w+drivers/usb/dwc3/ep0.c:85:19: warning: cast from pointer to integer
> of different size [-Wpointer-to-int-cast]
> w+drivers/usb/dwc3/core.c: In function 'dwc3_setup_scratch_buffers':
> w+drivers/usb/dwc3/core.c:284:19: warning: cast to pointer from
> integer of different size [-Wint-to-pointer-cast]
> w+drivers/usb/dwc3/core.c: In function 'dwc3_free_scratch_buffers':
> w+drivers/usb/dwc3/core.c:299:19: warning: cast to pointer from
> integer of different size [-Wint-to-pointer-cast]
> w+drivers/usb/gadget/udc/udc-core.c: In function 'usb_gadget_unmap_request':
> w+drivers/usb/gadget/udc/udc-core.c:68:19: warning: cast to pointer
> from integer of different size [-Wint-to-pointer-cast]
> w+drivers/usb/dwc3/ep0.c: In function 'dwc3_ep0_complete_data':
> w+drivers/usb/dwc3/ep0.c:793:19: warning: cast from pointer to integer
> of different size [-Wpointer-to-int-cast]
> w+drivers/usb/dwc3/ep0.c:824:21: warning: cast from pointer to integer
> of different size [-Wpointer-to-int-cast]
> w+drivers/usb/dwc3/ep0.c:834:20: warning: cast from pointer to integer
> of different size [-Wpointer-to-int-cast]
> w+drivers/usb/dwc3/core.c: In function 'dwc3_uboot_init':
> w+drivers/usb/dwc3/core.c:632:14: warning: cast to pointer from
> integer of different size [-Wint-to-pointer-cast]
> w+drivers/usb/dwc3/gadget.c: In function 'dwc3_prepare_one_trb':
> w+drivers/usb/dwc3/gadget.c:775:19: warning: cast from pointer to
> integer of different size [-Wpointer-to-int-cast]
> w+drivers/usb/dwc3/gadget.c: In function 'dwc3_cleanup_done_reqs':
> w+drivers/usb/dwc3/gadget.c:1772:19: warning: cast from pointer to
> integer of different size [-Wpointer-to-int-cast]
> w+drivers/usb/gadget/f_thor.c: In function 'thor_tx_data':
> w+drivers/usb/gadget/f_thor.c:568:2: warning: format '%d' expects
> argument of type 'int', but argument 4 has type 'long unsigned int'
> [-Wformat=]
> w+drivers/usb/dwc3/gadget.c: In function 'dwc3_gadget_uboot_handle_interrupt':
> w+drivers/usb/dwc3/gadget.c:2673:21: warning: cast from pointer to
> integer of different size [-Wpointer-to-int-cast]
>     0    1    0 /1      xilinx_zynqmp_ep
> 

Here are step for running qemu.

git clone git://git.qemu.org/qemu.git
cd qemu
git submodule update --init pixman
./configure --target-list=aarch64-softmmu --disable-werror

./aarch64-softmmu/qemu-system-aarch64 -M xlnx-ep108 -display none
-kernel /mnt/disk/u-boot/u-boot.elf -m 8000000 -nographic -serial mon:stdio

Please try and you will see.

I have ZynqMP Serial DM. Will send patches tmr.

Thanks,
Michal




-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform


-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150901/b81b1e30/attachment.sig>