[U-Boot] [PATCH] mxs: mxsboot: fix endianess for sd boot images

[Stefano Babic <sbabic@denx.de>]

Hi Michael,

On 01/09/2015 23:58, Michael Heimpold wrote:
> Running mxsboot on a big-endian system produces a sd image which
> cannot be started by the i.MX28 ROM. It complains on the debug
> uart as following:

I confess that I never tested mxsboot and/or mkimage on a big endian
host. I am expecting there are similar issues with mkimage and imximage,
too....

> 0x8020a009
>           0x80502008
> 0x8020a009
>           0x80502008
> ...
> 
> Enforcing all fields within the BCB to little-endian make
> the image bootable again.
> 
> Signed-off-by: Michael Heimpold <mhei@heimpold.de>
> ---
>  tools/mxsboot.c |   19 ++++++++++---------
>  1 file changed, 10 insertions(+), 9 deletions(-)
> 
> diff --git a/tools/mxsboot.c b/tools/mxsboot.c
> index 185b327..8284e95 100644
> --- a/tools/mxsboot.c
> +++ b/tools/mxsboot.c
> @@ -7,6 +7,7 @@
>   * SPDX-License-Identifier:	GPL-2.0+
>   */
>  
> +#include <endian.h>
>  #include <fcntl.h>
>  #include <sys/stat.h>
>  #include <sys/types.h>
> @@ -569,15 +570,15 @@ static int mx28_create_sd_image(int infd, int outfd)
>  
>  	cb = (struct mx28_sd_config_block *)buf;
>  
> -	cb->signature = 0x00112233;
> -	cb->primary_boot_tag = 0x1;
> -	cb->secondary_boot_tag = 0x1;
> -	cb->num_copies = 1;
> -	cb->drv_info[0].chip_num = 0x0;
> -	cb->drv_info[0].drive_type = 0x0;
> -	cb->drv_info[0].tag = 0x1;
> -	cb->drv_info[0].first_sector_number = sd_sector + 4;
> -	cb->drv_info[0].sector_count = (size - 4) / 512;
> +	cb->signature = htole32(0x00112233);
> +	cb->primary_boot_tag = htole32(0x1);
> +	cb->secondary_boot_tag = htole32(0x1);
> +	cb->num_copies = htole32(1);
> +	cb->drv_info[0].chip_num = htole32(0x0);
> +	cb->drv_info[0].drive_type = htole32(0x0);
> +	cb->drv_info[0].tag = htole32(0x1);
> +	cb->drv_info[0].first_sector_number = htole32(sd_sector + 4);
> +	cb->drv_info[0].sector_count = htole32((size - 4) / 512);
>  
>  	wr_size = write(outfd, buf, size);
>  	if (wr_size != size) {
> 

Looks ok to me !

Acked-by: Stefano Babic <sbabic@denx.de>

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================