From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sinan Akman Date: Wed, 2 Sep 2015 14:57:52 -0400 Subject: [U-Boot] [PATCHv2] arm: socfpga: Add support for the Terasic DE-0 Atlas board In-Reply-To: <55E70530.4060101@opensource.altera.com> References: <1441147312-10864-1-git-send-email-dinguyen@opensource.altera.com> <201509021018.21173.marex@denx.de> <55E70530.4060101@opensource.altera.com> Message-ID: <55E746B0.3000802@writeme.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 02/09/15 10:18 AM, Dinh Nguyen wrote: > > > On 9/2/15 3:18 AM, Marek Vasut wrote: >> On Wednesday, September 02, 2015 at 12:41:52 AM, dinguyen at opensource.altera.com >> wrote: >>> From: Dinh Nguyen >>> >>> Add support for the Terasic DE0-Nano/Atlas-SoC Kit, which is a CycloneV >>> based board. The board can boot from SD/MMC. Ethernet is also supported. >>> >>> Signed-off-by: Dinh Nguyen >>> --- >>> v2: add ethernet support >>> moved board files to board/terasic/de0-nano-soc/ >>> associate everything with 'de0-nano-soc' or 'de0_nano_soc' >>> based on u-boot-socfpga/wip/boards branch >> >> Applied to wip/boards, thanks. I shuffled the order in arch/arm/mach- >> socfpga/Kconfig so that things are sorted properly. Can you please >> double-check that everything builds for you ? >> > > Yes, everything builds for me. Thanks! Hi Dinh FYI, I just pulled from wip/boards and built with socfpga_de0_nano_soc_defconfig and booted from SD : U-Boot SPL 2015.10-rc2-00311-g859de28-dirty (Sep 02 2015 - 14:47:55) drivers/ddr/altera/sequencer.c: Preparing to start memory calibration drivers/ddr/altera/sequencer.c: CALIBRATION PASSED drivers/ddr/altera/sequencer.c: Calibration complete bad magic spl: mmc: no boot mode left to try ### ERROR ### Please RESET the board ### Not sure what I have missed. Regards Sinan Akman