From mboxrd@z Thu Jan 1 00:00:00 1970 From: Igor Grinberg Date: Thu, 3 Sep 2015 11:35:25 +0300 Subject: [U-Boot] [PATCH 1/3] compulab: eeprom: select i2c bus when querying for board rev In-Reply-To: <1441209920-10583-2-git-send-email-nikita@compulab.co.il> References: <1441209920-10583-1-git-send-email-nikita@compulab.co.il> <1441209920-10583-2-git-send-email-nikita@compulab.co.il> Message-ID: <55E8064D.9050901@compulab.co.il> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Nikita, On 09/02/15 19:05, Nikita Kiryanov wrote: > Add support for selecting which eeprom is queried for board revision by > extending cl_eeprom_get_board_rev() to accept an i2c bus number. > > Cc: Stefano Babic > Cc: Igor Grinberg > Signed-off-by: Nikita Kiryanov Acked-by: Igor Grinberg > --- > board/compulab/cm_fx6/cm_fx6.c | 2 +- > board/compulab/cm_t35/cm_t35.c | 2 +- > board/compulab/common/eeprom.c | 4 ++-- > board/compulab/common/eeprom.h | 4 ++-- > 4 files changed, 6 insertions(+), 6 deletions(-) > > diff --git a/board/compulab/cm_fx6/cm_fx6.c b/board/compulab/cm_fx6/cm_fx6.c > index 3ad1216..572111d 100644 > --- a/board/compulab/cm_fx6/cm_fx6.c > +++ b/board/compulab/cm_fx6/cm_fx6.c > @@ -708,7 +708,7 @@ int dram_init(void) > > u32 get_board_rev(void) > { > - return cl_eeprom_get_board_rev(); > + return cl_eeprom_get_board_rev(CONFIG_SYS_I2C_EEPROM_BUS); > } > > static struct mxc_serial_platdata cm_fx6_mxc_serial_plat = { > diff --git a/board/compulab/cm_t35/cm_t35.c b/board/compulab/cm_t35/cm_t35.c > index 398c573..26c6a81 100644 > --- a/board/compulab/cm_t35/cm_t35.c > +++ b/board/compulab/cm_t35/cm_t35.c > @@ -105,7 +105,7 @@ int board_init(void) > */ > u32 get_board_rev(void) > { > - return cl_eeprom_get_board_rev(); > + return cl_eeprom_get_board_rev(CONFIG_SYS_I2C_EEPROM_BUS); > }; > > int misc_init_r(void) > diff --git a/board/compulab/common/eeprom.c b/board/compulab/common/eeprom.c > index 77bcea4..aaacd2e 100644 > --- a/board/compulab/common/eeprom.c > +++ b/board/compulab/common/eeprom.c > @@ -121,7 +121,7 @@ static u32 board_rev; > * Routine: cl_eeprom_get_board_rev > * Description: read system revision from eeprom > */ > -u32 cl_eeprom_get_board_rev(void) > +u32 cl_eeprom_get_board_rev(uint eeprom_bus) > { > char str[5]; /* Legacy representation can contain at most 4 digits */ > uint offset = BOARD_REV_OFFSET_LEGACY; > @@ -129,7 +129,7 @@ u32 cl_eeprom_get_board_rev(void) > if (board_rev) > return board_rev; > > - if (cl_eeprom_setup(CONFIG_SYS_I2C_EEPROM_BUS)) > + if (cl_eeprom_setup(eeprom_bus)) > return 0; > > if (cl_eeprom_layout != LAYOUT_LEGACY) > diff --git a/board/compulab/common/eeprom.h b/board/compulab/common/eeprom.h > index 50c6b02..e74c379 100644 > --- a/board/compulab/common/eeprom.h > +++ b/board/compulab/common/eeprom.h > @@ -12,13 +12,13 @@ > > #ifdef CONFIG_SYS_I2C > int cl_eeprom_read_mac_addr(uchar *buf, uint eeprom_bus); > -u32 cl_eeprom_get_board_rev(void); > +u32 cl_eeprom_get_board_rev(uint eeprom_bus); > #else > static inline int cl_eeprom_read_mac_addr(uchar *buf, uint eeprom_bus) > { > return 1; > } > -static inline u32 cl_eeprom_get_board_rev(void) > +static inline u32 cl_eeprom_get_board_rev(uint eeprom_bus) > { > return 0; > } > -- Regards, Igor.