[U-Boot] [PATCH] arm: socfpga: dm: Fix DM initialization failure after warm reset

[Jian Luo <Jian.Luo4@boschrexroth.de>]

On 03.09.2015 12:46, Marek Vasut wrote:
 > On Thursday, September 03, 2015 at 12:17:13 PM, Jian Luo wrote:
 >
 > Hi!
 >
 > [...]
 >
 >>  >> Yes, I can. But U-Boot can still have problem with other Image which
 >>  >> disables ECC.
 >>  >> I found another post related to this problem
 >>  >> https://lkml.org/lkml/2015/2/6/685 .
 >>  >>
 >>  >>      Quote: To initialize ECC, the OCRAM needs to enable ECC 
then clear
 >>  >>
 >>  >> the entire
 >>  >>
 >>  >>      memory to zero before using it.
 >>
 >> Hi!
 >>
 >>  > Oh, but that is a problem, since we're running from the OCRAM 
ourselves,
 >>  > thus we cannot clear the OCRAM. Maybe we should force-disable the ECC
 >>  > instead? But can we be sure that the corruption does not happen when
 >>  > you disable ECC ?
 >>
 >> Yes, that will be a problem. It's also why I let the SYSMGR_ECC_OCRAM_EN
 >> bit intact in the patch.
 >
 > OK, but what about turning the ECC off in the SPL, will that also 
introduce
 > corruption or not ? That might be the right fix, no ?

Hi Marek,

Sorry, I don't know the detail of ECC implementation in socfpga.
Dinh might have the answer to that.

Anyhow I still think let the setting untouched is the safest fix.
SPL should use the same ECC setting which BROM loads SPL with.

 >
 > Best regards,
 > Marek Vasut

Best regards,

Jian Luo