From mboxrd@z Thu Jan  1 00:00:00 1970
From: Michal Simek <michal.simek@xilinx.com>
Date: Fri, 4 Sep 2015 09:46:02 +0200
Subject: [U-Boot] [PATCH v5 07/16] dts: zc770-xm010: Enable zynq qspi
 controller node
In-Reply-To: <1441352013-7510-1-git-send-email-jteki@openedev.com>
References: <1441352013-7510-1-git-send-email-jteki@openedev.com>
Message-ID: <55E94C3A.9070603@xilinx.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 09/04/2015 09:33 AM, Jagan Teki wrote:
> Enabled zynq qspi controller node for zc770-xm010 board.
> 
> => sf probe 0 -- bus1 for selecting qspi controller
> => sf probe 1 -- bus0 for selecting spi controller
> 
> Signed-off-by: Jagan Teki <jteki@openedev.com>
> Cc: Simon Glass <sjg@chromium.org>
> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
> Cc: Michal Simek <michal.simek@xilinx.com>
> ---
> Changes for v2. v3, v4:
> 	- none
> Changes for v5:
> 	- Make qspi as spi0
> 
>  arch/arm/dts/zynq-zc770-xm010.dts | 7 ++++++-
>  1 file changed, 6 insertions(+), 1 deletion(-)

Acked-by: Michal Simek <michal.simek@xilinx.com>

Thanks,
Michal