From mboxrd@z Thu Jan  1 00:00:00 1970
From: Igor Grinberg <grinberg@compulab.co.il>
Date: Sun, 6 Sep 2015 16:38:08 +0300
Subject: [U-Boot] [PATCH V2 4/4] arm: mx6: cm-fx6: modify device tree
 for old revisions of utilite
In-Reply-To: <1441529318-23973-5-git-send-email-nikita@compulab.co.il>
References: <1441529318-23973-1-git-send-email-nikita@compulab.co.il>
 <1441529318-23973-5-git-send-email-nikita@compulab.co.il>
Message-ID: <55EC41C0.2010104@compulab.co.il>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 09/06/15 11:48, Nikita Kiryanov wrote:
> Old revisions of Utilite (a miniature PC based on cm-fx6) do not have
> a card detect for mmc, and thus the kernel needs to be told that
> there's a persistent storage on usdhc3 to force it to probe the mmc
> card.
> 
> Check the baseboard revision and modify the device tree accordingly
> if needed.
> 
> Cc: Stefano Babic <sbabic@denx.de>
> Cc: Igor Grinberg <grinberg@compulab.co.il>
> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
> ---
> Changes in V2:
> 	- #define USDHC3_PATH instead of const variable usdhc3_path
> 	- Do not update device tree on eeprom read failures in a more explicit
> 	  way
> 
>  board/compulab/cm_fx6/cm_fx6.c | 20 ++++++++++++++++++++
>  1 file changed, 20 insertions(+)
> 
> diff --git a/board/compulab/cm_fx6/cm_fx6.c b/board/compulab/cm_fx6/cm_fx6.c
> index 572111d..a21e7b0 100644
> --- a/board/compulab/cm_fx6/cm_fx6.c
> +++ b/board/compulab/cm_fx6/cm_fx6.c
> @@ -580,9 +580,14 @@ int cm_fx6_setup_ecspi(void) { return 0; }
>  #endif
>  
>  #ifdef CONFIG_OF_BOARD_SETUP
> +#define USDHC3_PATH	"/soc/aips-bus at 02100000/usdhc at 02198000/"
>  int ft_board_setup(void *blob, bd_t *bd)
>  {
> +	u32 baseboard_rev;
> +	int nodeoffset;
>  	uint8_t enetaddr[6];
> +	char baseboard_name[16];

That would probably have the actual size (macro).

> +	int err;
>  
>  	/* MAC addr */
>  	if (eth_getenv_enetaddr("ethaddr", enetaddr)) {
> @@ -596,6 +601,21 @@ int ft_board_setup(void *blob, bd_t *bd)
>  				     enetaddr, 6, 1);
>  	}
>  
> +	baseboard_rev = cl_eeprom_get_board_rev(0);
> +	err = cl_eeprom_get_product_name((uchar *)baseboard_name, 0);

I would replace the 0 with a define explaining what that is.

> +	if (err || baseboard_rev == 0)
> +		return 0; /* Assume not an early revision SB-FX6m baseboard */
> +
> +	if (!strncmp("SB-FX6m", baseboard_name, 7) && baseboard_rev <= 120) {
> +		fdt_shrink_to_minimum(blob); /* Make room for new properties */
> +		nodeoffset = fdt_path_offset(blob, USDHC3_PATH);
> +		fdt_delprop(blob, nodeoffset, "cd-gpios");
> +		fdt_find_and_setprop(blob, USDHC3_PATH, "non-removable",
> +				     NULL, 0, 1);
> +		fdt_find_and_setprop(blob, USDHC3_PATH, "keep-power-in-suspend",
> +				     NULL, 0, 1);
> +	}
> +
>  	return 0;
>  }
>  #endif
> 

-- 
Regards,
Igor.