[U-Boot] [PATCH 3/4] mx6ul_14x14_evk: Remove CONFIG_SPL_FAT_SUPPORT

[Stefano Babic <sbabic@denx.de>]

Hi Peng, Fabio,

On 09/09/2015 05:29, Peng Fan wrote:
> Hi Fabio,
> 
> On Tue, Sep 08, 2015 at 02:43:11PM -0300, Fabio Estevam wrote:
>> If the SD card does not contain the u-boot.img then we get the
>> following error:
>>
>> U-Boot SPL 2015.10-rc2-23947-g7ad5930 (Sep 08 2015 - 14:10:29)                  
>> ** Partition 1 not valid on device 0 **                                         
>> spl_register_fat_device: fat register err - -1                                  
>> spl_load_image_fat: error reading image u-boot.img, err - -1    
>>
>> Remove CONFIG_SPL_FAT_SUPPORT and let CONFIG_SPL_MMC_SUPPORT do the
>> job.
>>
>> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
>> ---
>> include/configs/mx6ul_14x14_evk.h | 1 -
>> 1 file changed, 1 deletion(-)
>>
>> diff --git a/include/configs/mx6ul_14x14_evk.h b/include/configs/mx6ul_14x14_evk.h
>> index 4a2280b..e785925 100644
>> --- a/include/configs/mx6ul_14x14_evk.h
>> +++ b/include/configs/mx6ul_14x14_evk.h
>> @@ -17,7 +17,6 @@
>> /* SPL options */
>> #define CONFIG_SPL_LIBCOMMON_SUPPORT
>> #define CONFIG_SPL_MMC_SUPPORT
>> -#define CONFIG_SPL_FAT_SUPPORT
> 
> Can we keep this? Without this, we need to burn u-boot.img into sdcard, but
> i prefer to load u-boot.img from the fat partition.

Well, how U-Boot is stored on the SD-Card is a decision that you take
based on the balance safety against comfortably.
Both are ok on my side. If we put u-boot.img in raw SD at a fixed
address, it is very uncommon that a user destroy accessing it. On the
other side, putting it into a FAT partition makes easier to update for
everybody - just copying it into a disk.
The issue reported by Fabio is like a corrupted SD-Card - the SD-Card
does not contain the correct bootloader and it is ok if it does not boot
or hangs. Both ways have advantages and disadvantages.

Regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================