[U-Boot] [PATCH V2 0/4] cm-fx6 updates for Utilite

[Stefano Babic <sbabic@denx.de>]

On 06/09/2015 10:48, Nikita Kiryanov wrote:
> This series provides a fix necessary for early models of Utilite, a miniature
> desktop based on CM-FX6. It implements a dynamic modification to the device tree
> that is necessary for mmc boot.
> 
> Cc: Stefano Babic <sbabic@denx.de>
> Cc: Igor Grinberg <grinberg@compulab.co.il>
> 
> Changes in V2:
> 	- New patch: compulab: eeprom: propagate error value in read_mac_addr()
> 	- s/BOARD_PRODUCT_NAME_*/PRODUCT_NAME_*
> 	- rewrote cl_eeprom_get_product_name() to take a buffer parameter and
> 	  added documentation
> 	- #define USDHC3_PATH instead of const variable usdhc3_path
> 	- Do not update device tree on eeprom read failures in a more explicit
> 	  way
> 
> Nikita Kiryanov (4):
>   compulab: eeprom: select i2c bus when querying for board rev
>   compulab: eeprom: propagate error value in read_mac_addr()
>   compulab: eeprom: add support for obtaining product name
>   arm: mx6: cm-fx6: modify device tree for old revisions of utilite
> 
>  board/compulab/cm_fx6/cm_fx6.c | 22 +++++++++++++++++++++-
>  board/compulab/cm_t35/cm_t35.c |  2 +-
>  board/compulab/common/eeprom.c | 40 ++++++++++++++++++++++++++++++++++++----
>  board/compulab/common/eeprom.h | 10 ++++++++--
>  4 files changed, 66 insertions(+), 8 deletions(-)
> 


Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================