From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Sun, 13 Sep 2015 10:50:20 +0200 Subject: [U-Boot] [PATCH 1/4] thermal: imx_thermal: Do not print on error In-Reply-To: <1441734192-21326-1-git-send-email-fabio.estevam@freescale.com> References: <1441734192-21326-1-git-send-email-fabio.estevam@freescale.com> Message-ID: <55F538CC.4010800@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 08/09/2015 19:43, Fabio Estevam wrote: > It is not very useful to have the message below on every boot > (especially when we are using early silicon): > > U-Boot 2015.10-rc2-23945-g37cf215 (Sep 08 2015 - 14:12:14 -0300) > > CPU: Freescale i.MX6UL rev1.0 792 MHz (running at 396 MHz) > CPU: Commercial temperature grade (0C to 95C)CPU: Thermal invalid data, fuse: 0x0 > - invalid sensor device > > , so turn the error message into debug level. > > Signed-off-by: Fabio Estevam > --- > drivers/thermal/imx_thermal.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c > index 3c6c967..04c43d7 100644 > --- a/drivers/thermal/imx_thermal.c > +++ b/drivers/thermal/imx_thermal.c > @@ -159,7 +159,7 @@ static int imx_thermal_probe(struct udevice *dev) > > /* Check for valid fuse */ > if (fuse == 0 || fuse == ~0) { > - printf("CPU: Thermal invalid data, fuse: 0x%x\n", fuse); > + debug("CPU: Thermal invalid data, fuse: 0x%x\n", fuse); > return -EPERM; > } > > Applied to u-boot-imx, thanks ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================