* [U-Boot] [PATCH v3 1/4] sunxi: move SPL-related definitions to platform-specific include
2015-09-17 16:52 [U-Boot] [PATCH v3 0/4] sunxi: support FEL-provided environment vars and "fel" boot target Bernhard Nortmann
@ 2015-09-17 16:52 ` Bernhard Nortmann
2015-09-18 7:58 ` Bernhard Nortmann
2015-09-17 16:52 ` [U-Boot] [PATCH v3 2/4] sunxi: (mksunxiboot) signature to indicate "sunxi" SPL variant Bernhard Nortmann
` (3 subsequent siblings)
4 siblings, 1 reply; 10+ messages in thread
From: Bernhard Nortmann @ 2015-09-17 16:52 UTC (permalink / raw)
To: u-boot
The sunxi platform currently doesn't seem to make any use of the
asm/arch-sunxi/spl.h file. This patch moves some declarations from
tools/mksunxiboot.c into it.
This enables us to reuse those definitions when extending the
sunxi board code (boards/sunxi/boards.c).
Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de>
---
Changes in v3:
- (new with v3)
Changes in v2: None
arch/arm/include/asm/arch-sunxi/spl.h | 25 +++++++++++++++++--------
tools/mksunxiboot.c | 17 +----------------
2 files changed, 18 insertions(+), 24 deletions(-)
diff --git a/arch/arm/include/asm/arch-sunxi/spl.h b/arch/arm/include/asm/arch-sunxi/spl.h
index acbec46..751de75 100644
--- a/arch/arm/include/asm/arch-sunxi/spl.h
+++ b/arch/arm/include/asm/arch-sunxi/spl.h
@@ -9,12 +9,21 @@
#ifndef _ASM_ARCH_SPL_H_
#define _ASM_ARCH_SPL_H_
-#define BOOT_DEVICE_NONE 0
-#define BOOT_DEVICE_XIP 1
-#define BOOT_DEVICE_NAND 2
-#define BOOT_DEVICE_ONE_NAND 3
-#define BOOT_DEVICE_MMC2 5 /*emmc*/
-#define BOOT_DEVICE_MMC1 6
-#define BOOT_DEVICE_XIPWAIT 7
-#define BOOT_DEVICE_MMC2_2 0xff
+#define BOOT0_MAGIC "eGON.BT0"
+
+/* boot head definition from sun4i boot code */
+struct boot_file_head {
+ uint32_t b_instruction; /* one intruction jumping to real code */
+ uint8_t magic[8]; /* ="eGON.BT0" or "eGON.BT1", not C-style str */
+ uint32_t check_sum; /* generated by PC */
+ uint32_t length; /* generated by PC */
+ /*
+ * We use a simplified header, only filling in what is needed
+ * by the boot ROM. To be compatible with Allwinner tools we
+ * would need to implement the proper fields here instead of
+ * padding.
+ */
+ uint8_t pad[12]; /* align to 32 bytes */
+};
+
#endif
diff --git a/tools/mksunxiboot.c b/tools/mksunxiboot.c
index 676d392..54f4d05 100644
--- a/tools/mksunxiboot.c
+++ b/tools/mksunxiboot.c
@@ -15,23 +15,8 @@
#include <errno.h>
#include <sys/types.h>
#include <sys/stat.h>
+#include "asm/arch/spl.h"
-/* boot head definition from sun4i boot code */
-struct boot_file_head {
- uint32_t b_instruction; /* one intruction jumping to real code */
- uint8_t magic[8]; /* ="eGON.BT0" or "eGON.BT1", not C-style str */
- uint32_t check_sum; /* generated by PC */
- uint32_t length; /* generated by PC */
- /*
- * We use a simplified header, only filling in what is needed
- * by the boot ROM. To be compatible with Allwinner tools we
- * would need to implement the proper fields here instead of
- * padding.
- */
- uint8_t pad[12]; /* align to 32 bytes */
-};
-
-#define BOOT0_MAGIC "eGON.BT0"
#define STAMP_VALUE 0x5F0A6C39
/* check sum functon from sun4i boot code */
--
2.4.6
^ permalink raw reply related [flat|nested] 10+ messages in thread* [U-Boot] [PATCH v3 1/4] sunxi: move SPL-related definitions to platform-specific include
2015-09-17 16:52 ` [U-Boot] [PATCH v3 1/4] sunxi: move SPL-related definitions to platform-specific include Bernhard Nortmann
@ 2015-09-18 7:58 ` Bernhard Nortmann
2015-09-20 13:06 ` Hans de Goede
0 siblings, 1 reply; 10+ messages in thread
From: Bernhard Nortmann @ 2015-09-18 7:58 UTC (permalink / raw)
To: u-boot
Am 17.09.2015 um 18:52 schrieb Bernhard Nortmann:
> The sunxi platform currently doesn't seem to make any use of the
> asm/arch-sunxi/spl.h file. This patch moves some declarations from
> tools/mksunxiboot.c into it.
>
> This enables us to reuse those definitions when extending the
> sunxi board code (boards/sunxi/boards.c).
>
> Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de>
>
> ---
>
> Changes in v3:
> - (new with v3)
>
> Changes in v2: None
>
> arch/arm/include/asm/arch-sunxi/spl.h | 25 +++++++++++++++++--------
> tools/mksunxiboot.c | 17 +----------------
> 2 files changed, 18 insertions(+), 24 deletions(-)
>
> diff --git a/arch/arm/include/asm/arch-sunxi/spl.h b/arch/arm/include/asm/arch-sunxi/spl.h
> index acbec46..751de75 100644
> --- a/arch/arm/include/asm/arch-sunxi/spl.h
> +++ b/arch/arm/include/asm/arch-sunxi/spl.h
> @@ -9,12 +9,21 @@
> #ifndef _ASM_ARCH_SPL_H_
> #define _ASM_ARCH_SPL_H_
>
> -#define BOOT_DEVICE_NONE 0
> -#define BOOT_DEVICE_XIP 1
> -#define BOOT_DEVICE_NAND 2
> -#define BOOT_DEVICE_ONE_NAND 3
> -#define BOOT_DEVICE_MMC2 5 /*emmc*/
> -#define BOOT_DEVICE_MMC1 6
> -#define BOOT_DEVICE_XIPWAIT 7
> -#define BOOT_DEVICE_MMC2_2 0xff
> +#define BOOT0_MAGIC "eGON.BT0"
> +
> +/* boot head definition from sun4i boot code */
> +struct boot_file_head {
> + uint32_t b_instruction; /* one intruction jumping to real code */
> + uint8_t magic[8]; /* ="eGON.BT0" or "eGON.BT1", not C-style str */
> + uint32_t check_sum; /* generated by PC */
> + uint32_t length; /* generated by PC */
> + /*
> + * We use a simplified header, only filling in what is needed
> + * by the boot ROM. To be compatible with Allwinner tools we
> + * would need to implement the proper fields here instead of
> + * padding.
> + */
> + uint8_t pad[12]; /* align to 32 bytes */
> +};
> +
> #endif
> diff --git a/tools/mksunxiboot.c b/tools/mksunxiboot.c
> index 676d392..54f4d05 100644
> --- a/tools/mksunxiboot.c
> +++ b/tools/mksunxiboot.c
> @@ -15,23 +15,8 @@
> #include <errno.h>
> #include <sys/types.h>
> #include <sys/stat.h>
> +#include "asm/arch/spl.h"
>
> -/* boot head definition from sun4i boot code */
> -struct boot_file_head {
> - uint32_t b_instruction; /* one intruction jumping to real code */
> - uint8_t magic[8]; /* ="eGON.BT0" or "eGON.BT1", not C-style str */
> - uint32_t check_sum; /* generated by PC */
> - uint32_t length; /* generated by PC */
> - /*
> - * We use a simplified header, only filling in what is needed
> - * by the boot ROM. To be compatible with Allwinner tools we
> - * would need to implement the proper fields here instead of
> - * padding.
> - */
> - uint8_t pad[12]; /* align to 32 bytes */
> -};
> -
> -#define BOOT0_MAGIC "eGON.BT0"
> #define STAMP_VALUE 0x5F0A6C39
>
> /* check sum functon from sun4i boot code */
One minor thing: This doesn't touch the boilerplate header of
asm/arch-sunxi/spl.h. However "a copy of omap3/spl.h" and the
copyright notice don't really apply any longer, so feel free
to change that to something more suitable...
Regards, B. Nortmann
^ permalink raw reply [flat|nested] 10+ messages in thread* [U-Boot] [PATCH v3 1/4] sunxi: move SPL-related definitions to platform-specific include
2015-09-18 7:58 ` Bernhard Nortmann
@ 2015-09-20 13:06 ` Hans de Goede
0 siblings, 0 replies; 10+ messages in thread
From: Hans de Goede @ 2015-09-20 13:06 UTC (permalink / raw)
To: u-boot
Hi,
On 09/18/2015 03:58 AM, Bernhard Nortmann wrote:
> Am 17.09.2015 um 18:52 schrieb Bernhard Nortmann:
>> The sunxi platform currently doesn't seem to make any use of the
>> asm/arch-sunxi/spl.h file. This patch moves some declarations from
>> tools/mksunxiboot.c into it.
>>
>> This enables us to reuse those definitions when extending the
>> sunxi board code (boards/sunxi/boards.c).
>>
>> Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de>
>>
>> ---
>>
>> Changes in v3:
>> - (new with v3)
>>
>> Changes in v2: None
>>
>> arch/arm/include/asm/arch-sunxi/spl.h | 25 +++++++++++++++++--------
>> tools/mksunxiboot.c | 17 +----------------
>> 2 files changed, 18 insertions(+), 24 deletions(-)
>>
>> diff --git a/arch/arm/include/asm/arch-sunxi/spl.h b/arch/arm/include/asm/arch-sunxi/spl.h
>> index acbec46..751de75 100644
>> --- a/arch/arm/include/asm/arch-sunxi/spl.h
>> +++ b/arch/arm/include/asm/arch-sunxi/spl.h
>> @@ -9,12 +9,21 @@
>> #ifndef _ASM_ARCH_SPL_H_
>> #define _ASM_ARCH_SPL_H_
>> -#define BOOT_DEVICE_NONE 0
>> -#define BOOT_DEVICE_XIP 1
>> -#define BOOT_DEVICE_NAND 2
>> -#define BOOT_DEVICE_ONE_NAND 3
>> -#define BOOT_DEVICE_MMC2 5 /*emmc*/
>> -#define BOOT_DEVICE_MMC1 6
>> -#define BOOT_DEVICE_XIPWAIT 7
>> -#define BOOT_DEVICE_MMC2_2 0xff
>> +#define BOOT0_MAGIC "eGON.BT0"
>> +
>> +/* boot head definition from sun4i boot code */
>> +struct boot_file_head {
>> + uint32_t b_instruction; /* one intruction jumping to real code */
>> + uint8_t magic[8]; /* ="eGON.BT0" or "eGON.BT1", not C-style str */
>> + uint32_t check_sum; /* generated by PC */
>> + uint32_t length; /* generated by PC */
>> + /*
>> + * We use a simplified header, only filling in what is needed
>> + * by the boot ROM. To be compatible with Allwinner tools we
>> + * would need to implement the proper fields here instead of
>> + * padding.
>> + */
>> + uint8_t pad[12]; /* align to 32 bytes */
>> +};
>> +
>> #endif
>> diff --git a/tools/mksunxiboot.c b/tools/mksunxiboot.c
>> index 676d392..54f4d05 100644
>> --- a/tools/mksunxiboot.c
>> +++ b/tools/mksunxiboot.c
>> @@ -15,23 +15,8 @@
>> #include <errno.h>
>> #include <sys/types.h>
>> #include <sys/stat.h>
>> +#include "asm/arch/spl.h"
>> -/* boot head definition from sun4i boot code */
>> -struct boot_file_head {
>> - uint32_t b_instruction; /* one intruction jumping to real code */
>> - uint8_t magic[8]; /* ="eGON.BT0" or "eGON.BT1", not C-style str */
>> - uint32_t check_sum; /* generated by PC */
>> - uint32_t length; /* generated by PC */
>> - /*
>> - * We use a simplified header, only filling in what is needed
>> - * by the boot ROM. To be compatible with Allwinner tools we
>> - * would need to implement the proper fields here instead of
>> - * padding.
>> - */
>> - uint8_t pad[12]; /* align to 32 bytes */
>> -};
>> -
>> -#define BOOT0_MAGIC "eGON.BT0"
>> #define STAMP_VALUE 0x5F0A6C39
>> /* check sum functon from sun4i boot code */
>
> One minor thing: This doesn't touch the boilerplate header of
> asm/arch-sunxi/spl.h. However "a copy of omap3/spl.h" and the
> copyright notice don't really apply any longer, so feel free
> to change that to something more suitable...
Good point, I've fixed this up in my personal tree.
Regards,
Hans
^ permalink raw reply [flat|nested] 10+ messages in thread
* [U-Boot] [PATCH v3 2/4] sunxi: (mksunxiboot) signature to indicate "sunxi" SPL variant
2015-09-17 16:52 [U-Boot] [PATCH v3 0/4] sunxi: support FEL-provided environment vars and "fel" boot target Bernhard Nortmann
2015-09-17 16:52 ` [U-Boot] [PATCH v3 1/4] sunxi: move SPL-related definitions to platform-specific include Bernhard Nortmann
@ 2015-09-17 16:52 ` Bernhard Nortmann
2015-09-17 16:52 ` [U-Boot] [PATCH v3 3/4] sunxi: retrieve FEL-provided values to environment variables Bernhard Nortmann
` (2 subsequent siblings)
4 siblings, 0 replies; 10+ messages in thread
From: Bernhard Nortmann @ 2015-09-17 16:52 UTC (permalink / raw)
To: u-boot
This patch follows up on a discussion of ways to improve support
for the sunxi FEL ("USB boot") mechanism, especially with regard
to boot scripts, see:
https://groups.google.com/d/msg/linux-sunxi/wBEGUoLNRro/rHGq6nSYCQAJ
The idea is to convert the (currently unused) "pad" bytes in the
SPL header into an area where data can be passed to U-Boot. To
do this safely, we have to make sure that we're actually using
our "sunxi" flavor of the SPL, and not the Allwinner boot0.
The modified mksunxiboot introduces a special signature to the
SPL header in place of the "pub_head_size" field. This can be
used to reliably distinguish between compatible versions of sunxi
SPL and anything else (older variants or Allwinner's boot0).
Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de>
---
Changes in v3:
- adapted to use asm/arch/spl.h
Changes in v2:
- Rename field to fel_script_address, discard fel_data_size
- Clearing header fields is no longer needed, as mksunxiboot.c zeroes entire image first
arch/arm/include/asm/arch-sunxi/spl.h | 19 ++++++++++++++++++-
tools/mksunxiboot.c | 4 ++++
2 files changed, 22 insertions(+), 1 deletion(-)
diff --git a/arch/arm/include/asm/arch-sunxi/spl.h b/arch/arm/include/asm/arch-sunxi/spl.h
index 751de75..08fe32d 100644
--- a/arch/arm/include/asm/arch-sunxi/spl.h
+++ b/arch/arm/include/asm/arch-sunxi/spl.h
@@ -10,6 +10,8 @@
#define _ASM_ARCH_SPL_H_
#define BOOT0_MAGIC "eGON.BT0"
+#define SPL_SIGNATURE "SPL" /* marks "sunxi" SPL header */
+#define SPL_HEADER_VERSION 1
/* boot head definition from sun4i boot code */
struct boot_file_head {
@@ -22,8 +24,23 @@ struct boot_file_head {
* by the boot ROM. To be compatible with Allwinner tools we
* would need to implement the proper fields here instead of
* padding.
+ *
+ * Actually we want the ability to recognize our "sunxi" variant
+ * of the SPL. To do so, let's place a special signature into the
+ * "pub_head_size" field. We can reasonably expect Allwinner's
+ * boot0 to always have the upper 16 bits of this set to 0 (after
+ * all the value shouldn't be larger than the limit imposed by
+ * SRAM size).
+ * If the signature is present (at 0x14), then we know it's safe
+ * to use the remaining 8 bytes (at 0x18) for our own purposes.
+ * (E.g. sunxi-tools "fel" utility can pass information there.)
*/
- uint8_t pad[12]; /* align to 32 bytes */
+ union {
+ uint32_t pub_head_size;
+ uint8_t spl_signature[4];
+ };
+ uint32_t fel_script_address;
+ uint32_t reserved; /* padding, align to 32 bytes */
};
#endif
diff --git a/tools/mksunxiboot.c b/tools/mksunxiboot.c
index 54f4d05..9c1c5b7 100644
--- a/tools/mksunxiboot.c
+++ b/tools/mksunxiboot.c
@@ -118,6 +118,10 @@ int main(int argc, char *argv[])
ALIGN(file_size + sizeof(struct boot_file_head), BLOCK_SIZE);
img.header.b_instruction = cpu_to_le32(img.header.b_instruction);
img.header.length = cpu_to_le32(img.header.length);
+
+ memcpy(img.header.spl_signature, SPL_SIGNATURE, 3); /* "sunxi" marker */
+ img.header.spl_signature[3] = SPL_HEADER_VERSION;
+
gen_check_sum(&img.header);
count = write(fd_out, &img, le32_to_cpu(img.header.length));
--
2.4.6
^ permalink raw reply related [flat|nested] 10+ messages in thread* [U-Boot] [PATCH v3 3/4] sunxi: retrieve FEL-provided values to environment variables
2015-09-17 16:52 [U-Boot] [PATCH v3 0/4] sunxi: support FEL-provided environment vars and "fel" boot target Bernhard Nortmann
2015-09-17 16:52 ` [U-Boot] [PATCH v3 1/4] sunxi: move SPL-related definitions to platform-specific include Bernhard Nortmann
2015-09-17 16:52 ` [U-Boot] [PATCH v3 2/4] sunxi: (mksunxiboot) signature to indicate "sunxi" SPL variant Bernhard Nortmann
@ 2015-09-17 16:52 ` Bernhard Nortmann
2015-09-17 21:28 ` Hans de Goede
2015-09-17 16:52 ` [U-Boot] [PATCH v3 4/4] sunxi: add "fel" boot target Bernhard Nortmann
2015-09-17 21:48 ` [U-Boot] [PATCH v3 0/4] sunxi: support FEL-provided environment vars and " Hans de Goede
4 siblings, 1 reply; 10+ messages in thread
From: Bernhard Nortmann @ 2015-09-17 16:52 UTC (permalink / raw)
To: u-boot
This patch extends the misc_init_r() function on sunxi boards
to test for the presence of a suitable "sunxi" SPL header. If
found, and the loader ("fel" utility) provided a non-zero value
for the boot.scr address, then the corresponding environment
variable fel_scriptaddr gets set.
misc_init_r() also sets (or clears) the "fel_booted" variable depending
on the active boot device, using the same logic as spl_boot_device().
The goal is to provide sufficient information (within the U-Boot
environment) to make intelligent decisions on how to continue the boot
process, allowing specific customizations for the "FEL boot" case.
Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de>
---
Changes in v3:
- make use of asm/arch/spl.h to share definitions / helper macro
- revert SPL version check to expect exact SPL_HEADER_VERSION
Changes in v2:
- renamed fel_data_addr to fel_script_addr, discarded fel_data_size
- make sure that FEL-related environment vars are always cleared first
- support minimum and maximum SPL (header) version, more verbose error messages
arch/arm/cpu/armv7/sunxi/board.c | 2 +-
arch/arm/include/asm/arch-sunxi/spl.h | 5 +++++
arch/arm/include/asm/spl.h | 5 +++++
board/sunxi/board.c | 35 +++++++++++++++++++++++++++++++++++
4 files changed, 46 insertions(+), 1 deletion(-)
diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c
index b40198b..0d68d20 100644
--- a/arch/arm/cpu/armv7/sunxi/board.c
+++ b/arch/arm/cpu/armv7/sunxi/board.c
@@ -152,7 +152,7 @@ u32 spl_boot_device(void)
* binary over USB. If it is found, it determines where SPL was
* read from.
*/
- if (readl(4) != 0x4E4F4765 || readl(8) != 0x3054422E) /* eGON.BT0 */
+ if (!is_boot0_magic(SPL_ADDR + 4)) /* eGON.BT0 */
return BOOT_DEVICE_BOARD;
/* The BROM will try to boot from mmc0 first, so try that first. */
diff --git a/arch/arm/include/asm/arch-sunxi/spl.h b/arch/arm/include/asm/arch-sunxi/spl.h
index 08fe32d..8abf79a 100644
--- a/arch/arm/include/asm/arch-sunxi/spl.h
+++ b/arch/arm/include/asm/arch-sunxi/spl.h
@@ -13,6 +13,9 @@
#define SPL_SIGNATURE "SPL" /* marks "sunxi" SPL header */
#define SPL_HEADER_VERSION 1
+/* Note: A80 will require special handling here: SPL_ADDR 0x10000 */
+#define SPL_ADDR 0x0
+
/* boot head definition from sun4i boot code */
struct boot_file_head {
uint32_t b_instruction; /* one intruction jumping to real code */
@@ -43,4 +46,6 @@ struct boot_file_head {
uint32_t reserved; /* padding, align to 32 bytes */
};
+#define is_boot0_magic(addr) (memcmp((void *)addr, BOOT0_MAGIC, 8) == 0)
+
#endif
diff --git a/arch/arm/include/asm/spl.h b/arch/arm/include/asm/spl.h
index 6db405d..6587732 100644
--- a/arch/arm/include/asm/spl.h
+++ b/arch/arm/include/asm/spl.h
@@ -7,6 +7,11 @@
#ifndef _ASM_SPL_H_
#define _ASM_SPL_H_
+#if defined(CONFIG_SUNXI)
+/* sunxi platform-specific additions */
+#include <asm/arch/spl.h>
+#endif
+
#if defined(CONFIG_OMAP) \
|| defined(CONFIG_EXYNOS4) || defined(CONFIG_EXYNOS5) \
|| defined(CONFIG_EXYNOS4210)
diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index 9c855f6..096d127 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -516,6 +516,31 @@ void get_board_serial(struct tag_serialnr *serialnr)
}
#endif
+#if !defined(CONFIG_SPL_BUILD)
+#include <asm/arch/spl.h>
+
+/*
+ * Check the SPL header for the "sunxi" variant. If found: parse values
+ * that might have been passed by the loader ("fel" utility), and update
+ * the environment accordingly.
+ */
+static void parse_spl_header(const uint32_t spl_addr)
+{
+ struct boot_file_head *spl = (void *)spl_addr;
+ if (memcmp(spl->spl_signature, SPL_SIGNATURE, 3) == 0) {
+ uint8_t spl_header_version = spl->spl_signature[3];
+ if (spl_header_version == SPL_HEADER_VERSION) {
+ if (spl->fel_script_address)
+ setenv_hex("fel_scriptaddr",
+ spl->fel_script_address);
+ return;
+ }
+ printf("sunxi SPL version mismatch: expected %u, got %u\n",
+ SPL_HEADER_VERSION, spl_header_version);
+ }
+}
+#endif
+
#ifdef CONFIG_MISC_INIT_R
int misc_init_r(void)
{
@@ -524,6 +549,16 @@ int misc_init_r(void)
uint8_t mac_addr[6];
int ret;
+#if !defined(CONFIG_SPL_BUILD)
+ setenv("fel_booted", NULL);
+ setenv("fel_scriptaddr", NULL);
+ /* determine if we are running in FEL mode */
+ if (!is_boot0_magic(SPL_ADDR + 4)) { /* eGON.BT0 */
+ setenv("fel_booted", "1");
+ parse_spl_header(SPL_ADDR);
+ }
+#endif
+
ret = sunxi_get_sid(sid);
if (ret == 0 && sid[0] != 0 && sid[3] != 0) {
if (!getenv("ethaddr")) {
--
2.4.6
^ permalink raw reply related [flat|nested] 10+ messages in thread* [U-Boot] [PATCH v3 3/4] sunxi: retrieve FEL-provided values to environment variables
2015-09-17 16:52 ` [U-Boot] [PATCH v3 3/4] sunxi: retrieve FEL-provided values to environment variables Bernhard Nortmann
@ 2015-09-17 21:28 ` Hans de Goede
0 siblings, 0 replies; 10+ messages in thread
From: Hans de Goede @ 2015-09-17 21:28 UTC (permalink / raw)
To: u-boot
Hi,
On 09/17/2015 12:52 PM, Bernhard Nortmann wrote:
> This patch extends the misc_init_r() function on sunxi boards
> to test for the presence of a suitable "sunxi" SPL header. If
> found, and the loader ("fel" utility) provided a non-zero value
> for the boot.scr address, then the corresponding environment
> variable fel_scriptaddr gets set.
>
> misc_init_r() also sets (or clears) the "fel_booted" variable depending
> on the active boot device, using the same logic as spl_boot_device().
>
> The goal is to provide sufficient information (within the U-Boot
> environment) to make intelligent decisions on how to continue the boot
> process, allowing specific customizations for the "FEL boot" case.
>
> Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de>
> ---
>
> Changes in v3:
> - make use of asm/arch/spl.h to share definitions / helper macro
> - revert SPL version check to expect exact SPL_HEADER_VERSION
>
> Changes in v2:
> - renamed fel_data_addr to fel_script_addr, discarded fel_data_size
> - make sure that FEL-related environment vars are always cleared first
> - support minimum and maximum SPL (header) version, more verbose error messages
>
> arch/arm/cpu/armv7/sunxi/board.c | 2 +-
> arch/arm/include/asm/arch-sunxi/spl.h | 5 +++++
> arch/arm/include/asm/spl.h | 5 +++++
> board/sunxi/board.c | 35 +++++++++++++++++++++++++++++++++++
> 4 files changed, 46 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c
> index b40198b..0d68d20 100644
> --- a/arch/arm/cpu/armv7/sunxi/board.c
> +++ b/arch/arm/cpu/armv7/sunxi/board.c
> @@ -152,7 +152,7 @@ u32 spl_boot_device(void)
> * binary over USB. If it is found, it determines where SPL was
> * read from.
> */
> - if (readl(4) != 0x4E4F4765 || readl(8) != 0x3054422E) /* eGON.BT0 */
> + if (!is_boot0_magic(SPL_ADDR + 4)) /* eGON.BT0 */
> return BOOT_DEVICE_BOARD;
>
> /* The BROM will try to boot from mmc0 first, so try that first. */
> diff --git a/arch/arm/include/asm/arch-sunxi/spl.h b/arch/arm/include/asm/arch-sunxi/spl.h
> index 08fe32d..8abf79a 100644
> --- a/arch/arm/include/asm/arch-sunxi/spl.h
> +++ b/arch/arm/include/asm/arch-sunxi/spl.h
> @@ -13,6 +13,9 @@
> #define SPL_SIGNATURE "SPL" /* marks "sunxi" SPL header */
> #define SPL_HEADER_VERSION 1
>
> +/* Note: A80 will require special handling here: SPL_ADDR 0x10000 */
> +#define SPL_ADDR 0x0
> +
> /* boot head definition from sun4i boot code */
> struct boot_file_head {
> uint32_t b_instruction; /* one intruction jumping to real code */
> @@ -43,4 +46,6 @@ struct boot_file_head {
> uint32_t reserved; /* padding, align to 32 bytes */
> };
>
> +#define is_boot0_magic(addr) (memcmp((void *)addr, BOOT0_MAGIC, 8) == 0)
> +
> #endif
> diff --git a/arch/arm/include/asm/spl.h b/arch/arm/include/asm/spl.h
> index 6db405d..6587732 100644
> --- a/arch/arm/include/asm/spl.h
> +++ b/arch/arm/include/asm/spl.h
> @@ -7,6 +7,11 @@
> #ifndef _ASM_SPL_H_
> #define _ASM_SPL_H_
>
> +#if defined(CONFIG_SUNXI)
> +/* sunxi platform-specific additions */
> +#include <asm/arch/spl.h>
> +#endif
> +
> #if defined(CONFIG_OMAP) \
> || defined(CONFIG_EXYNOS4) || defined(CONFIG_EXYNOS5) \
> || defined(CONFIG_EXYNOS4210)
There is no need to pollute a non sunxi header this way, we can simply
do "#include <asm/arch/spl.h>" where needed.
No need to resend I've fixed this up in my tree.
Regards,
Hans
> diff --git a/board/sunxi/board.c b/board/sunxi/board.c
> index 9c855f6..096d127 100644
> --- a/board/sunxi/board.c
> +++ b/board/sunxi/board.c
> @@ -516,6 +516,31 @@ void get_board_serial(struct tag_serialnr *serialnr)
> }
> #endif
>
> +#if !defined(CONFIG_SPL_BUILD)
> +#include <asm/arch/spl.h>
> +
> +/*
> + * Check the SPL header for the "sunxi" variant. If found: parse values
> + * that might have been passed by the loader ("fel" utility), and update
> + * the environment accordingly.
> + */
> +static void parse_spl_header(const uint32_t spl_addr)
> +{
> + struct boot_file_head *spl = (void *)spl_addr;
> + if (memcmp(spl->spl_signature, SPL_SIGNATURE, 3) == 0) {
> + uint8_t spl_header_version = spl->spl_signature[3];
> + if (spl_header_version == SPL_HEADER_VERSION) {
> + if (spl->fel_script_address)
> + setenv_hex("fel_scriptaddr",
> + spl->fel_script_address);
> + return;
> + }
> + printf("sunxi SPL version mismatch: expected %u, got %u\n",
> + SPL_HEADER_VERSION, spl_header_version);
> + }
> +}
> +#endif
> +
> #ifdef CONFIG_MISC_INIT_R
> int misc_init_r(void)
> {
> @@ -524,6 +549,16 @@ int misc_init_r(void)
> uint8_t mac_addr[6];
> int ret;
>
> +#if !defined(CONFIG_SPL_BUILD)
> + setenv("fel_booted", NULL);
> + setenv("fel_scriptaddr", NULL);
> + /* determine if we are running in FEL mode */
> + if (!is_boot0_magic(SPL_ADDR + 4)) { /* eGON.BT0 */
> + setenv("fel_booted", "1");
> + parse_spl_header(SPL_ADDR);
> + }
> +#endif
> +
> ret = sunxi_get_sid(sid);
> if (ret == 0 && sid[0] != 0 && sid[3] != 0) {
> if (!getenv("ethaddr")) {
>
^ permalink raw reply [flat|nested] 10+ messages in thread
* [U-Boot] [PATCH v3 4/4] sunxi: add "fel" boot target
2015-09-17 16:52 [U-Boot] [PATCH v3 0/4] sunxi: support FEL-provided environment vars and "fel" boot target Bernhard Nortmann
` (2 preceding siblings ...)
2015-09-17 16:52 ` [U-Boot] [PATCH v3 3/4] sunxi: retrieve FEL-provided values to environment variables Bernhard Nortmann
@ 2015-09-17 16:52 ` Bernhard Nortmann
2015-09-17 21:48 ` [U-Boot] [PATCH v3 0/4] sunxi: support FEL-provided environment vars and " Hans de Goede
4 siblings, 0 replies; 10+ messages in thread
From: Bernhard Nortmann @ 2015-09-17 16:52 UTC (permalink / raw)
To: u-boot
This patch makes use of the previous changes to add a new "fel" boot
target for sunxi boards.
When booting via FEL, it's often desirable to work around the absence
of other (usable) boot devices - or to be able to override them,
deviating from the standard boot sequence. To achieve this, the "fel"
boot target gets the highest priority, but won't actually do anything
unless certain criteria are met.
The "bootcmd_fel" implementation proposed here first tests if an actual
FEL boot takes place (using the "fel_booted" env var), and secondly
checks that "fel_scriptaddr" was set (originating from the 'loader',
i.e. the sunxi-tools fel utility). If both checks pass, then it will
try to execute the boot script (boot.scr) at the given address. In case
of an error (e.g. an invalid image), the source command might return
"false", causing "distro_bootcmd" to proceed with the next boot target.
Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de>
Acked-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
---
Changes in v3: None
Changes in v2:
- renamed fel_data_addr to fel_scriptaddr
- combined both tests into one as suggested by Hans de Goede
include/configs/sunxi-common.h | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index 8e47d11..0161631 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -431,7 +431,18 @@ extern int soft_i2c_gpio_scl;
#define BOOT_TARGET_DEVICES_USB(func)
#endif
+/* FEL boot support, auto-execute boot.scr if a script address was provided */
+#define BOOTENV_DEV_FEL(devtypeu, devtypel, instance) \
+ "bootcmd_fel=" \
+ "if test -n ${fel_booted} && test -n ${fel_scriptaddr}; then " \
+ "echo '(FEL boot)'; " \
+ "source ${fel_scriptaddr}; " \
+ "fi\0"
+#define BOOTENV_DEV_NAME_FEL(devtypeu, devtypel, instance) \
+ "fel "
+
#define BOOT_TARGET_DEVICES(func) \
+ func(FEL, fel, na) \
BOOT_TARGET_DEVICES_MMC(func) \
BOOT_TARGET_DEVICES_SCSI(func) \
BOOT_TARGET_DEVICES_USB(func) \
--
2.4.6
^ permalink raw reply related [flat|nested] 10+ messages in thread* [U-Boot] [PATCH v3 0/4] sunxi: support FEL-provided environment vars and "fel" boot target
2015-09-17 16:52 [U-Boot] [PATCH v3 0/4] sunxi: support FEL-provided environment vars and "fel" boot target Bernhard Nortmann
` (3 preceding siblings ...)
2015-09-17 16:52 ` [U-Boot] [PATCH v3 4/4] sunxi: add "fel" boot target Bernhard Nortmann
@ 2015-09-17 21:48 ` Hans de Goede
2015-09-18 7:29 ` Bernhard Nortmann
4 siblings, 1 reply; 10+ messages in thread
From: Hans de Goede @ 2015-09-17 21:48 UTC (permalink / raw)
To: u-boot
Hi,
On 09/17/2015 12:52 PM, Bernhard Nortmann wrote:
> This patch series builds upon
> http://lists.denx.de/pipermail/u-boot/2015-September/226515.html
> http://lists.denx.de/pipermail/u-boot/2015-September/226688.html
>
> v2 combines the previous submissions, and adds some suggested
> fixes/changes.
>
> v3 introduces another patch at the start of the series to allow
> using shared definitions from a common asm/arch-sunxi/spl.h
> include. It's also aimed at addressing some of Siarhei's comments.
>
> Siarhei: As I've shuffled things around a bit for that, I'm
> not including your ACK on patch v3 2/4. The 4/4 one (bootcmd_fel)
> is unchanged, and now includes your ACK.
>
> The sunxi-tool side of things is discussed here:
> https://www.mail-archive.com/linux-sunxi at googlegroups.com/msg13071.html
>
> * Hans de Goede already pointed out that it might be preferable to
> make use of the spl_boot_device() function even from the main
> (non-SPL) U-Boot binary (e.g. for the "NAND" case). Currently this
> function is only available with CONFIG_SPL_BUILD set, and
> implemented in arch/arm/cpu/armv7/sunxi/board.c
> Would it be safe to enable it for non-SPL builds and use something
> like "(spl_boot_device == BOOT_DEVICE_BOARD)" for misc_init_r()?
>
> * Side note: the sunxi spl_boot_device() will probably require
> some future refinement anyway, to account for the 'oddball' A80.
> That SoC requires the SPL at a different address (0x10000 instead
> of 0x0).
> I've tried to address this (at least in part) by introducing a
> SPL_ADDR definition in the platform-specific spl.h.
>
> Regards, B. Nortmann
>
> Changes in v3:
> - (new with v3)
> - adapted to use asm/arch/spl.h
> - make use of asm/arch/spl.h to share definitions / helper macro
> - revert SPL version check to expect exact SPL_HEADER_VERSION
>
> Changes in v2:
> - Rename field to fel_script_address, discard fel_data_size
> - Clearing header fields is no longer needed, as mksunxiboot.c zeroes entire image first
> - renamed fel_data_addr to fel_script_addr, discarded fel_data_size
> - make sure that FEL-related environment vars are always cleared first
> - support minimum and maximum SPL (header) version, more verbose error messages
> - renamed fel_data_addr to fel_scriptaddr
> - combined both tests into one as suggested by Hans de Goede
>
> Bernhard Nortmann (4):
> sunxi: move SPL-related definitions to platform-specific include
> sunxi: (mksunxiboot) signature to indicate "sunxi" SPL variant
> sunxi: retrieve FEL-provided values to environment variables
> sunxi: add "fel" boot target
>
> arch/arm/cpu/armv7/sunxi/board.c | 2 +-
> arch/arm/include/asm/arch-sunxi/spl.h | 47 +++++++++++++++++++++++++++++------
> arch/arm/include/asm/spl.h | 5 ++++
> board/sunxi/board.c | 35 ++++++++++++++++++++++++++
> include/configs/sunxi-common.h | 11 ++++++++
> tools/mksunxiboot.c | 21 ++++------------
> 6 files changed, 96 insertions(+), 25 deletions(-)
Thanks, I've added these to my personal tree and will include
it in a future pull-req.
Regards,
Hans
^ permalink raw reply [flat|nested] 10+ messages in thread