[U-Boot] [PATCH 1/3] imx-common: fix iomux settings

[Stefano Babic <sbabic@denx.de>]

On 14/09/2015 07:34, Peng Fan wrote:
> When setting iomux for a pin mux, there is no need to check mux_ctrl_ofs.
> Also If still checking mux_ctrl_ofs, we have no chance to set iomux
> for i.MX7D IOMUXC_LPSR_SW_MUX_CTL_PAD_GPIO1_IO00, because the mux_ctrl_ofs
> for this register is 0.
> 
> Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
> Cc: Stefano Babic <sbabic@denx.de>
> Cc: Fabio Estevam <fabio.estevam@freescale.com>
> ---
>  arch/arm/imx-common/iomux-v3.c | 3 +--
>  1 file changed, 1 insertion(+), 2 deletions(-)
> 
> diff --git a/arch/arm/imx-common/iomux-v3.c b/arch/arm/imx-common/iomux-v3.c
> index b4f481f..9b9cf58 100644
> --- a/arch/arm/imx-common/iomux-v3.c
> +++ b/arch/arm/imx-common/iomux-v3.c
> @@ -53,8 +53,7 @@ void imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad)
>  	}
>  #endif
>  
> -	if (mux_ctrl_ofs)
> -		__raw_writel(mux_mode, base + mux_ctrl_ofs);
> +	__raw_writel(mux_mode, base + mux_ctrl_ofs);
>  
>  	if (sel_input_ofs)
>  		__raw_writel(sel_input, base + sel_input_ofs);
> 

Applied (whole series) to u-boot-imx, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================