public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Hans de Goede <hdegoede@redhat.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2] sunxi_nand_spl: Be smarter about where to look for backup u-boot.bin
Date: Mon, 21 Sep 2015 13:24:44 +0200	[thread overview]
Message-ID: <55FFE8FC.1070309@redhat.com> (raw)
In-Reply-To: <1442830971.10338.42.camel@hellion.org.uk>

Hi,

On 21-09-15 12:22, Ian Campbell wrote:
> On Sun, 2015-09-20 at 15:39 -0400, Hans de Goede wrote:
>> We know when u-boot is written to its own partition, in this case the
>> layout always is:
>>
>> eb 0 spl
>> eb 1 spl-backup
>> eb 2 u-boot
>> eb 3 u-boot-backup
>>
>> eb: erase-block
>>
>> So if we cannot load u-boot from its primary offset we know exactly where
>> to look for it.
>
> Is it worth noting here (or perhaps in a code comment?) that the code
> currently assumes that the first four ebs are of uniform size?

The eraseblock size is a property of the nand, given a certain nand chip,
all eraseblocks on that chip always have the same size.

Regards,

Hans


>
>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
>> ---
>> Changes in v2:
>> -Add an eraseblock_size helper variable to make the calculation for
>> finding
>>   the backup u-boot easier to understand
>> ---
>>   drivers/mtd/nand/sunxi_nand_spl.c | 26 ++++++++++++++++++++------
>>   1 file changed, 20 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/mtd/nand/sunxi_nand_spl.c
>> b/drivers/mtd/nand/sunxi_nand_spl.c
>> index 5985534..b0e07aa 100644
>> --- a/drivers/mtd/nand/sunxi_nand_spl.c
>> +++ b/drivers/mtd/nand/sunxi_nand_spl.c
>> @@ -356,18 +356,32 @@ static int nand_read_buffer(uint32_t offs, unsigned
>> int size, void *dest,
>>
>>   int nand_spl_load_image(uint32_t offs, unsigned int size, void *dest)
>>   {
>> +#if CONFIG_SYS_NAND_U_BOOT_OFFS == CONFIG_SPL_PAD_TO
>> +	/*
>> +	 * u-boot-dtb.bin appended to SPL, use syndrome (like the BROM
>> does)
>> +	 * and try different erase block sizes to find the backup.
>> +	 */
>>   	const uint32_t boot_offsets[] = {
>>   		0 * 1024 * 1024 + CONFIG_SYS_NAND_U_BOOT_OFFS,
>>   		1 * 1024 * 1024 + CONFIG_SYS_NAND_U_BOOT_OFFS,
>>   		2 * 1024 * 1024 + CONFIG_SYS_NAND_U_BOOT_OFFS,
>>   		4 * 1024 * 1024 + CONFIG_SYS_NAND_U_BOOT_OFFS,
>>   	};
>> -	int i, syndrome;
>> -
>> -	if (CONFIG_SYS_NAND_U_BOOT_OFFS == CONFIG_SPL_PAD_TO)
>> -		syndrome = 1; /* u-boot-dtb.bin appended to SPL */
>> -	else
>> -		syndrome = 0; /* u-boot-dtb.bin on its own partition */
>> +	const int syndrome = 1;
>> +#else
>> +	/*
>> +	 * u-boot-dtb.bin on its own partition, do not use syndrome, u
>> -boot
>> +	 * partition sits after 2 eraseblocks (spl, spl-backup), look
>> for
>> +	 * backup u-boot 1 erase block further.
>> +	 */
>> +	const uint32_t eraseblock_size = CONFIG_SYS_NAND_U_BOOT_OFFS /
>> 2;
>> +	const uint32_t boot_offsets[] = {
>> +		CONFIG_SYS_NAND_U_BOOT_OFFS,
>> +		CONFIG_SYS_NAND_U_BOOT_OFFS + eraseblock_size,
>> +	};
>> +	const int syndrome = 0;
>> +#endif
>> +	int i;
>>
>>   	if (offs == CONFIG_SYS_NAND_U_BOOT_OFFS) {
>>   		for (i = 0; i < ARRAY_SIZE(boot_offsets); i++) {

  reply	other threads:[~2015-09-21 11:24 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-09-20 19:39 [U-Boot] [PATCH v2] sunxi_nand_spl: Be smarter about where to look for backup u-boot.bin Hans de Goede
2015-09-21 10:22 ` Ian Campbell
2015-09-21 11:24   ` Hans de Goede [this message]
2015-09-21 12:19     ` Ian Campbell
2015-09-21 13:19       ` Hans de Goede
2015-09-21 13:44         ` Ian Campbell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=55FFE8FC.1070309@redhat.com \
    --to=hdegoede@redhat.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox