From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Mon, 21 Sep 2015 22:11:31 +0200 Subject: [U-Boot] SPI pending patches In-Reply-To: References: Message-ID: <56006473.4050808@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Otavio, Jagan, On 21/09/2015 20:36, Otavio Salvador wrote: > On Mon, Sep 21, 2015 at 3:21 PM, Jagan Teki wrote: >> On 21 September 2015 at 23:43, Otavio Salvador >> wrote: >>> Hello Jagan, >>> >>> I sent the new revision of the protective SPI NOR patches; is it >>> possible for you to review them? I would like to get them applied for >>> 2015.10 as they are blocking the Congatec patches. >> >> Out of all protection bit changes were very crucial, I will take some >> time to revert back. >> Will protection bit changes brocks your congatec patches? > > We need to protect the SPI NOR area or customer may erase the > manufacture data by mistake. We need the SPI NOR as well to read the > part-# and properly configure the SPL memory data so they are critical > for us. > > http://patchwork.ozlabs.org/patch/517089/ > http://patchwork.ozlabs.org/patch/517090/ > > I think if you ack the patches, they could go through the i.MX tree so > it goes in a single pull request. > > Stefano? It is fine with me - if SPI patches are ok for Jagan, I can pick them with Congatec's. Best regards, Stefano -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================