From: Jaehoon Chung <jh80.chung@samsung.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 4/4] exynos: fix and cleanup do_sdhci_init()
Date: Wed, 23 Sep 2015 18:59:24 +0900 [thread overview]
Message-ID: <560277FC.7090407@samsung.com> (raw)
In-Reply-To: <20150923114848.2d5b3731@amdc2363>
Hi,
On 09/23/2015 06:48 PM, Lukasz Majewski wrote:
> Hi Lukasz,
>
>> Hi Tobias,
>>
>>> The CD check is currently inverted. dm_gpio_get_value() returns
>>> one when a card is detected. All other values (zero when there
>>> is no card, or negative values for the internal errors) indicate
>>> failure.
>>>
>>> Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
>>> ---
>>> drivers/mmc/s5p_sdhci.c | 20 +++++++++++---------
>>> 1 file changed, 11 insertions(+), 9 deletions(-)
>>>
>>> diff --git a/drivers/mmc/s5p_sdhci.c b/drivers/mmc/s5p_sdhci.c
>>> index 6be3609..bc04370 100644
>>> --- a/drivers/mmc/s5p_sdhci.c
>>> +++ b/drivers/mmc/s5p_sdhci.c
>>> @@ -102,29 +102,31 @@ struct sdhci_host sdhci_host[SDHCI_MAX_HOSTS];
>>>
>>> static int do_sdhci_init(struct sdhci_host *host)
>>> {
>>> - int dev_id, flag;
>>> - int err = 0;
>>> + int dev_id, flag, ret;
>>>
>>> flag = host->bus_width == 8 ? PINMUX_FLAG_8BIT_MODE :
>>> PINMUX_FLAG_NONE; dev_id = host->index + PERIPH_ID_SDMMC0;
>>>
>>> if (dm_gpio_is_valid(&host->pwr_gpio)) {
>>> dm_gpio_set_value(&host->pwr_gpio, 1);
>>> - err = exynos_pinmux_config(dev_id, flag);
>>> - if (err) {
>>> + ret = exynos_pinmux_config(dev_id, flag);
>>> + if (ret) {
>>> debug("MMC not configured\n");
>>> - return err;
>>> + return ret;
>>> }
>>> }
>>>
>>> if (dm_gpio_is_valid(&host->cd_gpio)) {
>>> - if (dm_gpio_get_value(&host->cd_gpio))
>>> + ret = dm_gpio_get_value(&host->cd_gpio);
>>> + if (ret != 1) {
>>> + debug("No card detected (%d)\n", ret);
>>> return -ENODEV;
>>> + }
>>>
>>> - err = exynos_pinmux_config(dev_id, flag);
>>> - if (err) {
>>> + ret = exynos_pinmux_config(dev_id, flag);
>>> + if (ret) {
>>> printf("external SD not configured\n");
>>> - return err;
>>> + return ret;
>>> }
>>> }
>>>
>>
>> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
>>
>
> Sorry, I was too fast. I've read the whole thread and I can confirm
> that your change would break Trats board.
> ry
> I hope that we will come up with proper solution.
We can use the "cd-inverted" property like linux-kernel.
Then i think that all board based on exynos4412 can cover.
how about?
Best Regards,
Jaehoon Chung
>
next prev parent reply other threads:[~2015-09-23 9:59 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-20 23:54 [U-Boot] [PATCH 3/4] exynos: be more verbose in process_nodes() Tobias Jakobi
2015-09-20 23:54 ` [U-Boot] [PATCH 4/4] exynos: fix and cleanup do_sdhci_init() Tobias Jakobi
2015-09-23 9:44 ` Lukasz Majewski
2015-09-23 9:48 ` Lukasz Majewski
2015-09-23 9:59 ` Jaehoon Chung [this message]
2015-09-23 10:06 ` Lukasz Majewski
2015-09-23 10:06 ` Minkyu Kang
2015-09-24 12:48 ` Tobias Jakobi
2015-09-24 13:27 ` Lukasz Majewski
2015-09-24 15:05 ` Przemyslaw Marczak
2015-09-23 9:41 ` [U-Boot] [PATCH 3/4] exynos: be more verbose in process_nodes() Lukasz Majewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=560277FC.7090407@samsung.com \
--to=jh80.chung@samsung.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox