[U-Boot] [PATCH V2 3/3] mach-exynos: clock: restore calling dead exynos4_get_mmc_clk()

[Przemyslaw Marczak <p.marczak@samsung.com>]

Hello,

On 09/30/2015 09:26 AM, Przemyslaw Marczak wrote:
> Hello Simon,
>
> On 09/29/2015 06:47 AM, Simon Glass wrote:
>> Hi,
>>
>> On 28 September 2015 at 06:17, Przemyslaw Marczak
>> <p.marczak@samsung.com> wrote:
>>> After rework of code by:
>>>
>>> commit: d952796 Exynos5: Use clock_get_periph_rate generic API
>>>
>>> function get_mmc_clk() always returns -1 for Exynos 4.
>>>
>>> This was caused by omitting, that SDHCI driver for Exynos 4,
>>> calls get_mmc_clk(), with mmc device number as argument,
>>> instead of pinmux peripheral id, like DW MMC driver for Exynos 5.
>>>
>>> By this commit, the code directly calls a proper function
>>> to get mmc clock for Exynos 4, without checking the peripheral id.
>>>
>>> Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
>>> ---
>>> Changes V2:
>>> - cleanup commit message
>>> ---
>>>   arch/arm/mach-exynos/clock.c | 10 ++++------
>>>   1 file changed, 4 insertions(+), 6 deletions(-)
>>
>> I'll pick this up if needed. I tested that it does not break exynos5,
>> but have not tested it on exynos4.
>>
>> Acked-by: Simon Glass <sjg@chromium.org>
>>
>> Regars,
>> Simon
>>
>
> Thank you for testing. I tested this on Trats2 / Odroid U3 and X2  - all
> based on Exynos4412. I must only check Trats (Exynos 4210), since Lukasz
> mentioned about some issue. Anyway I think, that it can be picked up.
>
> Best regards,

+ Tested on Trats (Exynos4210)

Patchset fixes, sdhci issue on this board.

Best regards,
-- 
Przemyslaw Marczak
Samsung R&D Institute Poland
Samsung Electronics
p.marczak at samsung.com