[U-Boot] [PATCH] tbs2910: explicitly set boot address

[Soeren Moch <smoch@web.de>]

On 01.10.2015 22:48, Soeren Moch wrote:
> Set missing boot address in bootm command. This fixes the error:
>  Wrong Image Format for bootm command
>  ERROR: can't get kernel image!
> 
> Reported-by: Uwe Scheffler <scheffler.u@web.de>
> Signed-off-by: Soeren Moch <smoch@web.de>
> Tested-by: Uwe Scheffler <scheffler.u@web.de>
> ---
> Cc: Stefano Babic <sbabic@denx.de>
> Cc: Uwe Scheffler <scheffler.u@web.de>

Stefano, Tom,

since this fixes a user reported error, can we pull this in for v2015.10?

Thanks,
Soeren


> ---
>  include/configs/tbs2910.h | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h
> index 66cb274..5943104 100644
> --- a/include/configs/tbs2910.h
> +++ b/include/configs/tbs2910.h
> @@ -190,7 +190,7 @@
>  	"bootargs_upd=setenv bootargs console=ttymxc0,115200 " \
>  			"rdinit=/sbin/init enable_wait_mode=off\0" \
>  	"bootcmd_mmc=run bootargs_mmc; mmc dev 2; " \
> -			"mmc read 0x10800000 0x800 0x4000; bootm\0" \
> +			"mmc read 0x10800000 0x800 0x4000; bootm 0x10800000\0" \
>  	"bootcmd_up1=load mmc 1 0x10800000 uImage\0" \
>  	"bootcmd_up2=load mmc 1 0x10d00000 uramdisk.img; " \
>  			"run bootargs_upd; " \
>