From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stephen Warren Date: Thu, 1 Oct 2015 17:27:35 -0600 Subject: [U-Boot] How do I tell buildman to use a /specific/ toolchain? In-Reply-To: References: <560301ED.8020502@wwwdotorg.org> Message-ID: <560DC167.5080805@wwwdotorg.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 10/01/2015 04:59 PM, Simon Glass wrote: > Hi Stephen, > > On Wednesday, 23 September 2015, Stephen Warren wrote: >> >> Simon, >> >> I have 3 different ARM toolchains installed into /usr/bin via distro packages. How do I tell buildman which of those to use? >> >> I had originally thought that ~/.buildman's [toolchain] section contained CROSS_COMPILE-like values, so I tried: >> >>> [toolchain] >>> root: / >>> arm0-not-installed: arm-none-gnueabi- >>> arm1: arm-none-eabi- >>> arm2: arm-linux-gnueabihf- >>> arm3: arm-linux-gnueabi- >>> arch64: aarch64-linux-gnu- >>> >>> [toolchain-alias] >>> arm: arm1 >>> aarch64: aarch64 >> >> >> (I intended to change the "arm: arm1" line to point at arm1/2/3 based on which I wanted to use at a particular time). >> >> However, running "buildman --list-toolchains" and re-reading the docs shows me that the [toolchain] values are absolute directories that buildman searches for files named *-gcc: >> >>> - scanning path 'arm-none-gnueabi-' >>> - looking in 'arm-none-gnueabi-/.' >>> - looking in 'arm-none-gnueabi-/bin' >>> - looking in 'arm-none-gnueabi-/usr/bin' >> >> >> If buildman finds multiple toolchains, there doesn't seem to be a way to tell it which one to use. Am I missing something? >> >> I suppose a solution wouuld be to move the compiler binaries into different separate directories, and only list one of those directories in ~/.buildman. However, I can't do that for distro-packaged toolchains (well, I suppose I could manually mv everything all over the place, but that's really fragile since it'd break any time the package got upgraded or removed and re-installed). >> >> I think it makes sense to add new syntax into ~/.buildman to specify "don't do automagical searching, just use this CROSS_COMPILE value that I say". Does that sound reasonable? Automagic stuff makes for great defaults, but if it can't be overridden, it sucks when you actually know what you want. > > Yes I think it would be fine to add an option to use CROSS_COMPILE (of > course it would fail if you tried to build the board with the wrong > arch). I wasn't necessarily looking for buildman to pick up the CROSS_COMPILE environment variable, although that would be a simple solution for single-arch builds at least. My mention of CROSS_COMPILE immediately above was re: using values that are formatted in the same way as the CROSS_COMPILE environment variable would be, rather than directory names, in the config file. In other words, the example content I showed above. > The option other option at present is -G which lets you use multiple > .buildman files. You could have one of these for each toolchain. I don't think that gets me what I want. As far as I can tell, the buildman config file contains a list directories to search within, yet if I have 3 toolchains in a single directory, there's no way to select which one I want to use, is there? In other words, a config file that contains: [toolchain] distro-packages: /usr/bin ... finds the following toolchains: [swarren at swarren-lx1 u-boot]$ ./tools/buildman/buildman \ --list-tool-chains Scanning for tool chains - scanning path '/usr/bin' - looking in '/usr/bin/.' - found '/usr/bin/./arm-linux-gnueabi-gcc' - found '/usr/bin/./arm-linux-gnueabihf-gcc' - found '/usr/bin/./arm-none-eabi-gcc' (That's 3 AArch32 toolchains found) - found '/usr/bin/./winegcc' - found '/usr/bin/./aarch64-linux-gnu-gcc' - found '/usr/bin/./gcc' - found '/usr/bin/./c89-gcc' - found '/usr/bin/./x86_64-linux-gnu-gcc' - found '/usr/bin/./i586-mingw32msvc-gcc' - found '/usr/bin/./c99-gcc' - looking in '/usr/bin/bin' - looking in '/usr/bin/usr/bin' Tool chain test: OK Tool chain test: OK Tool chain test: OK Tool chain test: OK Tool chain test: OK Tool chain test: OK Tool chain test: OK Tool chain test: OK Tool chain test: OK Tool chain test: OK List of available toolchains (7): aarch64 : /usr/bin/./aarch64-linux-gnu-gcc arm : /usr/bin/./arm-linux-gnueabi-gcc (Buildman chose that one, and I think I have no control over that?) c89 : /usr/bin/./c89-gcc c99 : /usr/bin/./c99-gcc i586 : /usr/bin/./i586-mingw32msvc-gcc sandbox : /usr/bin/./winegcc x86_64 : /usr/bin/./x86_64-linux-gnu-gcc