From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Fri, 2 Oct 2015 10:43:22 +0200 Subject: [U-Boot] [PATCH v2 2/3] I2C: mxc_i2c: make I2C1 and I2C2 optional In-Reply-To: <1442868219-5553-2-git-send-email-albert.aribaud@3adev.fr> References: <1442868219-5553-1-git-send-email-albert.aribaud@3adev.fr> <1442868219-5553-2-git-send-email-albert.aribaud@3adev.fr> Message-ID: <560E43AA.9010604@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 21/09/2015 22:43, Albert ARIBAUD (3ADEV) wrote: > The driver assumed that I2C1 and I2C2 were always enabled, > and if they were not, then an asynchronous abort was (silently) > raised, to be caught much later on in the Linux kernel. > > Fix this by making I2C1 and I2C2 optional just like I2C3 and I2C4 > are. > > To make the change binary-invariant, declare I2C1 and I2C2 in > every include/configs/ file which defines CONFIG_SYS_I2C_MXC. > > Also, while updating README about CONFIG_SYS_I2C_MXC_I2C1 and > CONFIG_SYS_I2C_MXC_I2C2, add missing descriptions for I2C4 speed > (CONFIG_SYS_MXC_I2C4_SPEED) and slave (CONFIG_SYS_MXC_I2C4_SLAVE) > config options. > > Signed-off-by: Albert ARIBAUD (3ADEV) > --- Applied to u-boot-imx, thanks! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================