public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Sinan Akman <sinan@writeme.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] ls102xa: Fix reset hang
Date: Fri, 2 Oct 2015 10:21:11 -0400	[thread overview]
Message-ID: <560E92D7.80808@writeme.com> (raw)
In-Reply-To: <1443792315-18997-1-git-send-email-festevam@gmail.com>


   Hi Fabio

On 02/10/15 09:25 AM, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@freescale.com>
>
> Since commit 623d96e89aca6("imx: wdog: correct wcr register settings")
> issuing a 'reset' command causes the system to hang.
>
> Unlike i.MX and Vybrid, the watchdog controller on LS102x is big-endian.
>
> This means that the watchdog on LS1021 has been working by accident as
> it does not use the big-endian accessors in drivers/watchdog/imx_watchdog.c.
> Commit 623d96e89aca6("imx: wdog: correct wcr register settings") only
> revelead the endianness problem on LS102x.
>
> In order to fix the reset hang, introduce a reset_cpu() implementation that
> is specific for ls102x, which accesses the watchdog WCR register in big-endian
> format. All that is required to reset LS102x is to clear the SRS bit.
>
> Reported-by: Sinan Akman <sinan@writeme.com>
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---
>   arch/arm/cpu/armv7/ls102xa/cpu.c | 21 +++++++++++++++++++++
>   drivers/watchdog/Makefile        |  2 +-
>   2 files changed, 22 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/cpu/armv7/ls102xa/cpu.c b/arch/arm/cpu/armv7/ls102xa/cpu.c
> index 8dd95d9..0de6f19 100644
> --- a/arch/arm/cpu/armv7/ls102xa/cpu.c
> +++ b/arch/arm/cpu/armv7/ls102xa/cpu.c
> @@ -13,6 +13,7 @@
>   #include <tsec.h>
>   #include <netdev.h>
>   #include <fsl_esdhc.h>
> +#include <config.h>
>   
>   #include "fsl_epu.h"
>   
> @@ -354,3 +355,23 @@ void smp_kick_all_cpus(void)
>   	asm volatile("sev");
>   }
>   #endif
> +
> +struct watchdog_regs {
> +	u16	wcr;	/* Control */
> +	u16	wsr;	/* Service */
> +	u16	wrsr;	/* Reset Status */
> +};
> +
> +#define WCR_SRS		(1 << 4)
> +void reset_cpu(ulong addr)
> +{
> +	struct watchdog_regs *wdog = (struct watchdog_regs *)WDOG1_BASE_ADDR;
> +
> +	clrbits_be16(&wdog->wcr, WCR_SRS);
> +
> +	while (1) {
> +		/*
> +		 * Let the watchdog trigger
> +		 */
> +	}
> +}
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index 9e9cb55..a007ae8 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -7,7 +7,7 @@
>   
>   obj-$(CONFIG_AT91SAM9_WATCHDOG) += at91sam9_wdt.o
>   obj-$(CONFIG_FTWDT010_WATCHDOG) += ftwdt010_wdt.o
> -ifneq (,$(filter $(SOC), mx31 mx35 mx5 mx6 mx7 vf610 ls102xa))
> +ifneq (,$(filter $(SOC), mx31 mx35 mx5 mx6 mx7 vf610))
>   obj-y += imx_watchdog.o
>   endif
>   obj-$(CONFIG_S5P)               += s5p_wdt.o

    Tested-by: Sinan Akman <sinan@writeme.com>

    Regards
    Sinan Akman

  reply	other threads:[~2015-10-02 14:21 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-02 13:25 [U-Boot] [PATCH] ls102xa: Fix reset hang Fabio Estevam
2015-10-02 14:21 ` Sinan Akman [this message]
2015-10-02 14:34   ` Fabio Estevam
2015-10-02 14:55     ` Sinan Akman
2015-10-02 14:42 ` Wolfgang Denk
2015-10-02 14:51   ` Sinan Akman
2015-10-02 15:00   ` Fabio Estevam
2015-10-03 15:18   ` Tom Rini
2015-10-07 21:43     ` Fabio Estevam
2015-10-07 21:45       ` York Sun
2015-10-07 21:47         ` Fabio Estevam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=560E92D7.80808@writeme.com \
    --to=sinan@writeme.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox