From mboxrd@z Thu Jan  1 00:00:00 1970
From: Francisco Aguerre <faguerre@controles.com>
Date: Fri, 2 Oct 2015 17:03:13 -0300
Subject: [U-Boot] U-Boot GPIO console command
Message-ID: <560EE301.9060400@controles.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hello,

I have a rev B BeagleBone Black which I have been using for over a year 
as a development platform for a pseudo-clone board we are developing. We 
are using QNX as our OS.

Lately I have been tinkering with U-Boot to learn how the boot process 
works and configure our board properly. I cloned the U-boot git 
repository and built the 2015.10-rc2 version. The board boots fine and 
now the MPU frequency gets configured at 1GHz, but the thing is that the 
gpio console command doesn't seem to work anymore.

Previously I used the 2013.04 version of U-Boot and could toggle leds 
using the gpio comand (i.e. "gpio toggle 54" ), but now the same command 
just returns an error message "Command 'gpio' failed: Error -22".

Is there anything I've missed to make this command work properly? For 
building u-boot I used the am335x_boneblack_defconfig configuration.

Regards,

Francisco