[U-Boot] [PATCH v2] dm: tpm: Drop CONFIG_DM_TPM

[Christophe Ricard <christophe.ricard@gmail.com>]

Hi Simon,

Acked-by: Christophe Ricard<christophe-h.ricard@st.com>

Best Regards
Christophe

On 03/10/2015 14:39, Simon Glass wrote:
> Now that all TPM drivers use driver model, we can drop the special driver
> model CONFIG option.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
>
> Changes in v2:
> - Fix missing 'depends on DM' left out of the v1 patch
>
>   drivers/tpm/Kconfig  | 15 +++------------
>   drivers/tpm/Makefile |  2 +-
>   lib/Kconfig          |  1 +
>   3 files changed, 5 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/tpm/Kconfig b/drivers/tpm/Kconfig
> index 3ab652c..31b35f7 100644
> --- a/drivers/tpm/Kconfig
> +++ b/drivers/tpm/Kconfig
> @@ -4,15 +4,6 @@
>   
>   menu "TPM support"
>   
> -config DM_TPM
> -	bool "Enable driver model for Trusted Platform Module drivers"
> -	depends on DM && TPM
> -	help
> -          Enable driver model for TPMs. The TIS interface (tis_open(),
> -	  tis_sendrecv(), etc.) is then implemented by the TPM uclass. Note
> -	  that even with driver model only a single TPM is currently
> -	  supported, since the tpm library assumes this.
> -
>   config TPM_TIS_SANDBOX
>   	bool "Enable sandbox TPM driver"
>   	depends on SANDBOX
> @@ -24,7 +15,7 @@ config TPM_TIS_SANDBOX
>   
>   config TPM_ATMEL_TWI
>   	bool "Enable Atmel TWI TPM device driver"
> -	depends on DM_TPM && DM_I2C
> +	depends on TPM && DM_I2C
>   	help
>   	  This driver supports an Atmel TPM device connected on the I2C bus.
>   	  The usual tpm operations and the 'tpm' command can be used to talk
> @@ -33,7 +24,7 @@ config TPM_ATMEL_TWI
>   
>   config TPM_TIS_INFINEON
>   	bool "Enable support for Infineon SLB9635/45 TPMs on I2C"
> -	depends on DM_TPM && DM_I2C
> +	depends on TPM && DM_I2C
>   	help
>   	  This driver supports Infineon TPM devices connected on the I2C bus.
>   	  The usual tpm operations and the 'tpm' command can be used to talk
> @@ -57,7 +48,7 @@ config TPM_TIS_I2C_BURST_LIMITATION_LEN
>   
>   config TPM_TIS_LPC
>   	bool "Enable support for Infineon SLB9635/45 TPMs on LPC"
> -	depends on DM_TPM && X86
> +	depends on TPM && X86
>   	help
>   	  This driver supports Infineon TPM devices connected on the I2C bus.
>   	  The usual tpm operations and the 'tpm' command can be used to talk
> diff --git a/drivers/tpm/Makefile b/drivers/tpm/Makefile
> index 5748145..1d49e95 100644
> --- a/drivers/tpm/Makefile
> +++ b/drivers/tpm/Makefile
> @@ -3,7 +3,7 @@
>   # SPDX-License-Identifier:	GPL-2.0+
>   #
>   
> -obj-$(CONFIG_DM_TPM) += tpm-uclass.o
> +obj-$(CONFIG_TPM) += tpm-uclass.o
>   
>   obj-$(CONFIG_TPM_ATMEL_TWI) += tpm_atmel_twi.o
>   obj-$(CONFIG_TPM_TIS_INFINEON) += tpm_tis_infineon.o
> diff --git a/lib/Kconfig b/lib/Kconfig
> index 0673072..70ed20d 100644
> --- a/lib/Kconfig
> +++ b/lib/Kconfig
> @@ -56,6 +56,7 @@ source lib/rsa/Kconfig
>   
>   config TPM
>   	bool "Trusted Platform Module (TPM) Support"
> +	depends on DM
>   	help
>   	  This enables support for TPMs which can be used to provide security
>   	  features for your board. The TPM can be connected via LPC or I2C