From mboxrd@z Thu Jan  1 00:00:00 1970
From: Hannes Schmelzer <hannes@schmelzer.or.at>
Date: Wed, 07 Oct 2015 14:50:46 +0200
Subject: [U-Boot] SPL and DM on ZYNQ
Message-ID: <56151526.3010709@schmelzer.or.at>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

hi folks,

i am not very familar with driver model until now and so i've a question.

I'm trying to bring up my Zynq ZC702 evalboard using driver-model during 
SPL stage (because QSPI needs this).
I simply switched on "Driver Model for SPL" within Kconfig and compiled.

This ends up in:

U-Boot SPL 2015.10-rc4-00050-g996ec1d-dirty (Oct 07 2015 - 13:57:32)
 >>spl:board_init_r()
using memory 0xffff10c0-0xffff20c0 for malloc()
spl_init()
dm_init() failed: -2
dm_init_and_scan() returned error -2
### ERROR ### Please RESET the board ###


i had a look into drivers/core/root.c and saw that

device_bind_by_name(NULL, false, &root_info, &DM_ROOT_NON_CONST);

fails.

Any idea why the root-driver cannot be found ?
Maybe there are some switched need to be switched on too.

thanks,
Hannes