From mboxrd@z Thu Jan  1 00:00:00 1970
From: Sinan Akman <sinan@writeme.com>
Date: Thu, 8 Oct 2015 16:25:10 -0400
Subject: [U-Boot] mx6qp sabreauto hangs after saveenv/reset
In-Reply-To: <CAOMZO5C-7inaPxPkdOQMsL-w=Xfyxyh6GWm7QPWm_uwvmq3Mrg@mail.gmail.com>
References: <CAOMZO5C-7inaPxPkdOQMsL-w=Xfyxyh6GWm7QPWm_uwvmq3Mrg@mail.gmail.com>
Message-ID: <5616D126.7070009@writeme.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de



On 08/10/15 12:24 PM, Fabio Estevam wrote:
> Hi Peng,
>
> On a mx6qp sabreauto I noticed that the board hangs after doing:
>
> => saveenv
> => reset
>
> U-Boot 2015.10-rc4-24385-ge04e21c-dirty (Oct 08 2015 - 13:08:54 -0300)
>
> CPU:   Freescale i.MX6QP rev1.0 996 MHz (running at 792 MHz)
> CPU:   Automotive temperature grade (-40C to 125C) at 38C
> Reset cause: POR
> Board: MX6Q-Sabreauto revA
> I2C:   ready
> DRAM:  2 GiB
> PMIC:  PFUZE100 ID=0x10
> Flash: 32 MiB
> NAND:
>
> (hangs here)
>
> Any ideas?

   Now, is this before or after our recent reset revert ?

   Regards
   Sinan Akman