From mboxrd@z Thu Jan  1 00:00:00 1970
From: Sinan Akman <sinan@writeme.com>
Date: Thu, 8 Oct 2015 16:45:18 -0400
Subject: [U-Boot] mx6qp sabreauto hangs after saveenv/reset
In-Reply-To: <CAOMZO5ByqdzxE_rhORFwk_0UFnDN1+3pUPa0rG5TF+QtGSRJEg@mail.gmail.com>
References: <CAOMZO5C-7inaPxPkdOQMsL-w=Xfyxyh6GWm7QPWm_uwvmq3Mrg@mail.gmail.com>
 <5616D126.7070009@writeme.com>
 <CAOMZO5ByqdzxE_rhORFwk_0UFnDN1+3pUPa0rG5TF+QtGSRJEg@mail.gmail.com>
Message-ID: <5616D5DE.6030703@writeme.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de


   Hi Fabio

On 08/10/15 04:29 PM, Fabio Estevam wrote:
> Hi Sinan,
>
> On Thu, Oct 8, 2015 at 5:25 PM, Sinan Akman <sinan@writeme.com> wrote:
>
>>    Now, is this before or after our recent reset revert ?
> We ended up not doing the reset revert. I sent a patch adding a
> specific ls102x reset instead, but this one has not been applied yet.
>
> This one is unrelated to the watchdog issue. In the mx6qp the board
> resets, but it hangs in the NAND driver.
     OK, thanks.
>
> I did not have a chance to further debug it yet. mx6q does not show
> this problem.
>
> Regards,
>
> Fabio Estevam
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>