[U-Boot] [PATCH] nios2: convert cache flush to use dm cpu data

[Thomas Chou <thomas@wytron.com.tw>]

Hi Marek,

On 10/09/2015 10:49 AM, Ley Foon Tan wrote:
>> Is this an attempt at poor-mans' rounding ? I think you want to implment
>> something like arch/arm/cpu/arm926ejs/cache.c check_cache_range() and NOT
>> do any rounding here. The reason for that is that if you do rounding, you
>> might accidentally corrupt a piece of memory which was just delivered via
>> DMA before you did the flush.
> The code above is to convert the address to dcache line size.
> arch/arm/cpu/arm926ejs/cache.c check_cache_range() will skip the cache
> flushing if it is unaligned to cache line size. I'm not sure how
> frequent U-boot access to non-aligned cache line size.

Thanks a lot for your looking into this, Ley Foon.

I think we take cache flushing in a different way to arm926ejs.

In nios2 driver programming, we would request all the DMA buffers be 
aligned to cache line. This is necessary to avoid the cache racing issue 
as you mention above.

In nios2, we don't skip the flushing when the inputs are not aligned 
like that of arm926ejs. We always flush all cache lines in the range, 
even if a single byte to flush is in request. So the inputs are rounded 
to get the lower and upper cache lines range inside the cache flush 
functions. The caller need not be aware of the detail.

In the copy_exception_trampoline() patch, both dcache and icache must be 
flushed at the exception target address. Though the flush range is only 
12 bytes, which won't be aligned.

Thank you for your review.

Best regards,
Thomas