[U-Boot] [RFC] odroid DTB support

[Przemyslaw Marczak <p.marczak@samsung.com>]

Hello Guillaume,

On 10/09/2015 02:11 PM, Guillaume Gardet wrote:
> Hi Przemyslaw,
>
> I would like to add DTB support for odroid board to be able to boot
> upstream kernel easily.
>
> I see 2 ways to do it:
> * Add CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG support to set 'board_rev'
> and 'board_name' env vars. Then, you need a 'findfdt' script to check
> 'board_rev' and set fdtfile accordingly (as done for OMAP4 panda board)
> * Set fdtfile name directly (as done for rpi or igep00x0).
>
> What would you prefer?
>
>
> Guillaume
>
>

Is, that the reason of adding the boot script by your last patches?
If, yes then it's not needed. Odroid supports mainline kernel booting.

Just put kernel image and fdt file with it's proper (default) name to 
boot partition and wait for autoboot command to execute. This just work 
with defaults.

Also you can use itb image, to have a single boot image.

Best regards,
-- 
Przemyslaw Marczak
Samsung R&D Institute Poland
Samsung Electronics
p.marczak at samsung.com