[U-Boot] [PATCH V2 03/11] Peach-Pi: dts: add cpu-model string

[Przemyslaw Marczak <p.marczak@samsung.com>]

Hello Simon,

On 10/03/2015 04:28 PM, Simon Glass wrote:
> Hi Przemyslaw,
>
> On 21 September 2015 at 13:26, Przemyslaw Marczak <p.marczak@samsung.com> wrote:
>> This platform is based on Exynos5800 but the cpu id is 0x5422.
>> This doesn't fit the common Exynos SoC name convention, so now,
>> the CPU name is defined by device tree string, to be printed
>> properly.
>>
>> Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
>> ---
>> Changes V2:
>> - move cpu name from config to dts
>> ---
>>   arch/arm/dts/exynos5800-peach-pi.dts | 1 +
>>   1 file changed, 1 insertion(+)
>>
>> diff --git a/arch/arm/dts/exynos5800-peach-pi.dts b/arch/arm/dts/exynos5800-peach-pi.dts
>> index 1d7ff23..76826dc 100644
>> --- a/arch/arm/dts/exynos5800-peach-pi.dts
>> +++ b/arch/arm/dts/exynos5800-peach-pi.dts
>> @@ -12,6 +12,7 @@
>>
>>   / {
>>          model = "Samsung/Google Peach Pi board based on Exynos5800";
>> +       cpu-model = "Exynos5800";
>>
>>          compatible = "google,pit-rev#", "google,pit",
>>                  "google,peach", "samsung,exynos5800", "samsung,exynos5";
>> --
>> 1.9.1
>>
>
> Is this defined by the standard binding? If not, can you add or change
> the binding file?
>
> Regards,
> Simon
>

No, it's not standard. I will add binding info.

Best regards
-- 
Przemyslaw Marczak
Samsung R&D Institute Poland
Samsung Electronics
p.marczak at samsung.com