From mboxrd@z Thu Jan 1 00:00:00 1970 From: Przemyslaw Marczak Date: Tue, 13 Oct 2015 13:57:13 +0200 Subject: [U-Boot] [PATCH V2 03/11] Peach-Pi: dts: add cpu-model string In-Reply-To: References: <1440770374-11501-1-git-send-email-p.marczak@samsung.com> <1442838403-27777-1-git-send-email-p.marczak@samsung.com> <1442838403-27777-4-git-send-email-p.marczak@samsung.com> Message-ID: <561CF199.9010402@samsung.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello Simon, On 10/03/2015 04:28 PM, Simon Glass wrote: > Hi Przemyslaw, > > On 21 September 2015 at 13:26, Przemyslaw Marczak wrote: >> This platform is based on Exynos5800 but the cpu id is 0x5422. >> This doesn't fit the common Exynos SoC name convention, so now, >> the CPU name is defined by device tree string, to be printed >> properly. >> >> Signed-off-by: Przemyslaw Marczak >> --- >> Changes V2: >> - move cpu name from config to dts >> --- >> arch/arm/dts/exynos5800-peach-pi.dts | 1 + >> 1 file changed, 1 insertion(+) >> >> diff --git a/arch/arm/dts/exynos5800-peach-pi.dts b/arch/arm/dts/exynos5800-peach-pi.dts >> index 1d7ff23..76826dc 100644 >> --- a/arch/arm/dts/exynos5800-peach-pi.dts >> +++ b/arch/arm/dts/exynos5800-peach-pi.dts >> @@ -12,6 +12,7 @@ >> >> / { >> model = "Samsung/Google Peach Pi board based on Exynos5800"; >> + cpu-model = "Exynos5800"; >> >> compatible = "google,pit-rev#", "google,pit", >> "google,peach", "samsung,exynos5800", "samsung,exynos5"; >> -- >> 1.9.1 >> > > Is this defined by the standard binding? If not, can you add or change > the binding file? > > Regards, > Simon > No, it's not standard. I will add binding info. Best regards -- Przemyslaw Marczak Samsung R&D Institute Poland Samsung Electronics p.marczak at samsung.com