From mboxrd@z Thu Jan 1 00:00:00 1970 From: Heiko Schocher Date: Fri, 16 Oct 2015 09:56:44 +0200 Subject: [U-Boot] Porting UBI fixes (specially fastmap's) to U-Boot In-Reply-To: <5617B37D.5050403@denx.de> References: <561666CB.8070908@denx.de> <56166992.2020004@nod.at> <561683A5.6060000@denx.de> <56173C31.6010202@denx.de> <5617B37D.5050403@denx.de> Message-ID: <5620ADBC.60006@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello Ezequiel, Am 09.10.2015 um 14:30 schrieb Heiko Schocher: > Hello Ezequiel, > > Am 09.10.2015 um 06:01 schrieb Heiko Schocher: >> Hello Ezequiel, >> >> Am 08.10.2015 um 17:54 schrieb Ezequiel Garcia: >>> Heiko, >>> >>> On 8 October 2015 at 11:54, Heiko Schocher wrote: >>> [..] >>>> >>>> Currently I have a (with warnings) compiled U-Boot with ubi/ubifs >>>> with linux 4.2 base ... now testing (or tomorrow) >>>> >>> >>> If you share a branch, I can help with some tests here. >> >> I pushed my current develop state to: >> >> http://git.denx.de/?p=u-boot/u-boot-ubi.git;a=shortlog;h=refs/heads/ubi_sync_with_linux >> >> ! Only for Testing ! >> >> I tested it on the aristainetos2 board, with fastmap enabled. I was >> enable to attach the ubi partition on nand flash with the "ubi part .." >> command. If I have attached a partition and again call "ubi part ..." >> u-boot hangs currently ... more testing debugging hopefully I can do >> today. so there is some work for debugging. It would be nice, if you >> can look into this issue (and of course try ubi on your hw), thanks! >> >> And maybe you find time to get rid of the compilerwarnings ;-) >> >>> Thanks a lot for the quick work! >> >> You are welcome > > I just updated the "ubi_sync_with_linux" branch on u-boot-ubi. > > It seems UBI/UBIFS now work with the NAND on the aristainetos2 > board, but my stomach says, there are some subtile issues ... > > Still needs more testing, also not tested yet UBI on the SPI NOR on > this board. > > If I "nand erase" the mtd device, and try "ubi part ..." it fails > > :-( > > But If I flash_eraseall under linux the device, and then make > "ubi part..." in U-Boot, commmand succeeds ... ping? Did you had time for some tests? bye, Heiko -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany