From: Stefan Roese <sr@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] arm: sunxi: Add icnova-a20-swac defconfig and dts file
Date: Mon, 19 Oct 2015 12:38:46 +0200 [thread overview]
Message-ID: <5624C836.4000905@denx.de> (raw)
In-Reply-To: <56225187.6030009@redhat.com>
Hi Hans,
On 17.10.2015 15:47, Hans de Goede wrote:
> On 01-10-15 11:41, Stefan Roese wrote:
>> The ICnova-A20-SWAC is a baseboard, equipped with the ICnova-A20 SoM from
>> In-Circuit:
>>
>> http://wiki.in-circuit.de/index.php5?title=ICnova_A20_SODIMM
>> http://linux-sunxi.org/In-Circuit_ICnova_A20
>>
>> This patch adds support for this board, including ethernet, LCD and USB
>> support.
>
> Thanks, I've merged this and it will show up in u-boot-sunxi/next soon.
Thanks.
> I've made 2 small changes, see comments inline.
<snip>
>> diff --git a/configs/icnova-a20-swac_defconfig
>> b/configs/icnova-a20-swac_defconfig
>> new file mode 100644
>> index 0000000..bd6e0c5
>> --- /dev/null
>> +++ b/configs/icnova-a20-swac_defconfig
>> @@ -0,0 +1,21 @@
>> +CONFIG_ARM=y
>> +CONFIG_ARCH_SUNXI=y
>> +CONFIG_MACH_SUN7I=y
>> +CONFIG_DRAM_CLK=384
>> +CONFIG_OLD_SUNXI_KERNEL_COMPAT=y
>
> I've dropped this, I understand that you need it, but I do not believe that
> ANY defconfig's as shipped upstream should set this.
Hmmm. I would prefer to have this added to the defconfig as well.
As it very likely leads to confusion when updating to a newer
U-Boot version which will not support the old kernel. Why not give
the users / maintainers the freedom to choose this for themselves?
>> +CONFIG_MMC0_CD_PIN="PI5"
>> +CONFIG_USB0_VBUS_PIN="PG11"
>> +CONFIG_USB0_VBUS_DET="PH7"
>> +CONFIG_USB1_VBUS_PIN="PG10"
>> +CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:24,pclk_khz:33000,le:45,ri:209,up:22,lo:22,hs:1,vs:1,sync:3,vmode:0"
>>
>> +CONFIG_VIDEO_LCD_POWER="PH22"
>> +CONFIG_VIDEO_LCD_PANEL_LVDS=y
>> +CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-icnova-a20-swac"
>> +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
>> +CONFIG_SPL=y
>> +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,CMD_BMP,CMD_UNZIP"
>
> I've dropped AXP209_POWER from these, in u-boot-sunxi/next this has been
> turned into a Kconfig bool which is enabled by default on sun7i.
Understood.
Thanks,
Stefan
prev parent reply other threads:[~2015-10-19 10:38 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-01 9:41 [U-Boot] [PATCH] arm: sunxi: Add icnova-a20-swac defconfig and dts file Stefan Roese
2015-10-17 13:47 ` Hans de Goede
2015-10-18 9:34 ` Maxime Ripard
2015-10-19 10:48 ` Stefan Roese
2015-10-19 11:44 ` Hans de Goede
2015-10-19 11:53 ` Stefan Roese
2015-10-20 8:06 ` Ian Campbell
2015-10-21 14:31 ` Maxime Ripard
2015-10-21 14:44 ` Stefan Roese
2015-10-22 7:57 ` Maxime Ripard
2015-10-19 10:38 ` Stefan Roese
2015-10-19 11:42 ` Hans de Goede
2015-10-20 8:05 ` Ian Campbell
2015-10-19 10:38 ` Stefan Roese [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5624C836.4000905@denx.de \
--to=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox