From: Heiko Schocher <hs@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] Porting UBI fixes (specially fastmap's) to U-Boot
Date: Tue, 20 Oct 2015 06:00:29 +0200 [thread overview]
Message-ID: <5625BC5D.5090205@denx.de> (raw)
In-Reply-To: <56256544.2060306@nod.at>
Hello Richard
Am 19.10.2015 um 23:48 schrieb Richard Weinberger:
> Am 19.10.2015 um 23:40 schrieb Ezequiel Garcia:
>> On 19 October 2015 at 17:22, Richard Weinberger <richard@nod.at> wrote:
>>> Am 19.10.2015 um 15:47 schrieb Ezequiel Garcia:
>>>> After some further investigation, printing the counters as Richard suggested
>>>> I found it was a bug on my side :-( The Linux partition and the U-Boot partition
>>>> had different size (i.e. PEB count) and so Fastmap complained :-(
>>>>
>>>> We trimmed the Linux partition size, and forgot to change U-Boot's
>>>> (or thought it wouldn't matter).
>>>>
>>>> Sorry for the noise guys!
>>>
>>> Good to know. :)
>>>
>>> Let me find a way to detect and report this kind of user error
>>> better.
>>> The WARN_ON() is only meant for bad internal errors.
>>>
>>
>> Sure. In case it's not clear, let me clarify what the issue was: the
>> MTD partition
>> has one size in Linux (4072 EB) and another size in U-Boot (4076 EB).
>>
>> When the map was built by Linux's Fastmap, it contained a number of PEBs that
>> conflicted with the number of PEBs U-Boot's Fastmap code was expecting
>> (becase Linux EB != U-Boot EB).
>>
>> Not sure how you would detect such a mismatch, but it was a very good
>> idea to print a noisy warning :-)
>
> I think it would make sense to drop the WARN_ON() and replace it to a
> warning using ubi_err() which explains what possible went wrong.
> i.e. MTD partition layout mismatch, an internal error, etc...
Yep.
>> We were effectively running without fastmap so far, becasue neither U-Boot
>> nor Linux could find a proper fastmap and attach the UBI partition using it.
>
> Yeah, U-Boot's fast decided to fall back to scanning mode and had to drop the
> existing fastmap and therefore Linux also had to do a full scan too.
Didn;t got this, why is fastmap not working in U-Boot?
On the aristainetos2 board, I use fastmap, see:
http://xeidos.ddns.net/buildbot/builders/ari_ubi/builds/7/steps/shell/logs/tbotlog
search for "attached by fastmap" ...
nand 1024MiB:
05:02:32,905:INFO :tbotlib # write 1: ubi part ubi 4096
[...]
05:02:34,289:INFO :tbotlib # read 1: ubi0: attached by fastmap
[...]
05:02:34,529:INFO :tbotlib # read 1: ubi0: available PEBs: 3877, total reserved PEBs: 207, PEBs
reserved for bad PEB handling: 68
1024MiB ubi artition attached in 0.624 s ...
SPI Nor flash:
05:03:14,380:INFO :tbotlib # write 1: ubi part rescue-system 64
[...]
05:03:16,010:INFO :tbotlib # read 1: ubi0: attached by fastmap
[...]
05:03:16,215:INFO :tbotlib # read 1: ubi0: available PEBs: 10, total reserved PEBs: 231, PEBs
reserved for bad PEB handling: 0
15MiB Nor UBI partition in ~2 s ...
bye,
Heiko
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
next prev parent reply other threads:[~2015-10-20 4:00 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-02 16:27 [U-Boot] Porting UBI fixes (specially fastmap's) to U-Boot Ezequiel Garcia
2015-10-02 18:46 ` Richard Weinberger
2015-10-03 4:27 ` Heiko Schocher
2015-10-03 9:03 ` Richard Weinberger
2015-10-08 12:51 ` Heiko Schocher
2015-10-08 13:03 ` Richard Weinberger
2015-10-08 14:54 ` Heiko Schocher
2015-10-08 14:58 ` Hans de Goede
2015-10-08 16:04 ` Richard Weinberger
2015-10-09 3:34 ` Heiko Schocher
2015-10-08 15:54 ` Ezequiel Garcia
2015-10-09 4:01 ` Heiko Schocher
2015-10-09 12:30 ` Heiko Schocher
2015-10-16 7:56 ` Heiko Schocher
2015-10-16 11:58 ` Ezequiel Garcia
2015-10-17 18:07 ` Ezequiel Garcia
2015-10-17 18:28 ` Richard Weinberger
2015-10-19 5:17 ` Heiko Schocher
2015-10-19 13:47 ` Ezequiel Garcia
2015-10-19 14:53 ` Heiko Schocher
2015-10-19 20:22 ` Richard Weinberger
2015-10-19 21:40 ` Ezequiel Garcia
2015-10-19 21:48 ` Richard Weinberger
2015-10-20 4:00 ` Heiko Schocher [this message]
2015-10-20 7:16 ` Richard Weinberger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5625BC5D.5090205@denx.de \
--to=hs@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox