From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?UTF-8?Q?Andreas_Bie=c3=9fmann?= Date: Sat, 24 Oct 2015 00:43:33 +0200 Subject: [U-Boot] [PATCH] ARM: at91: sama5: change the environment address to 0x6000 In-Reply-To: <1445591900-1678-1-git-send-email-josh.wu@atmel.com> References: <1445591900-1678-1-git-send-email-josh.wu@atmel.com> Message-ID: <562AB815.9050006@googlemail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 23.10.15 11:18, Josh Wu wrote: > As sama5 board has 32k sram size, so the at91bootstrap and spl for sama5 > boards is bigger than 16k (0x4000). That will overlap the U-Boot > environment. So I move environment to 0x6000. And reduce its size as > well. > > Signed-off-by: Josh Wu Reviewed-by: Andreas Bie?mann > --- > > include/configs/at91-sama5_common.h | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/include/configs/at91-sama5_common.h b/include/configs/at91-sama5_common.h > index a5990ce..0b60f0b 100644 > --- a/include/configs/at91-sama5_common.h > +++ b/include/configs/at91-sama5_common.h > @@ -98,8 +98,8 @@ > #elif CONFIG_SYS_USE_SERIALFLASH > /* u-boot env in serial flash, by default is bus 0 and cs 0 */ > #define CONFIG_ENV_IS_IN_SPI_FLASH > -#define CONFIG_ENV_OFFSET 0x4000 > -#define CONFIG_ENV_SIZE 0x4000 > +#define CONFIG_ENV_OFFSET 0x6000 > +#define CONFIG_ENV_SIZE 0x2000 > #define CONFIG_ENV_SECT_SIZE 0x1000 > #define CONFIG_BOOTCOMMAND "sf probe 0; " \ > "sf read 0x21000000 0x60000 0xc000; " \ >